To Verify Proper Installation (Oracle x86 Systems)

1. During system power-on initiation, the following system booting BIOS initialization screen is displayed.

   QLogic Corporation
   QLE8152 PCI3.0 Fibre Channel ROM BIOS version 2.14
   Copyright (c) QLogic Corporation 1992-2009. All rights reserved.
   www.qlogic.com
    
   Press <CTRL-Q> or <ALT-Q> for Fast!UTIL
   BIOS for Adapter 0 is disabled
   BIOS for Adapter 1 is disabled
   ROM BIOS NOT INSTALLED
    
   

2. Immediately press Ctrl-Q.

   The following QLogic Fast!UTIL menu is displayed.

   QLogic Corporation
   QLE8152 PCI3.0 Fibre Channel ROM BIOS version 2.14
   Copyright (c) QLogic Corporation 1993-2009. All rights reserved.
   www.qlogic.com
    
   Press <CTRL-Q> or <ALT-Q> for Fast!UTIL
    
   BIOS for Adapter 0 is disabled
    
   BIOS for Adapter 1 is disabled
   ROM BIOS NOT INSTALLED
    
   <CTRL-Q> Detected, Initialization in progress, Please wait...
   

   Then the following QLogic Fast!UTIL menu is displayed.

                       QLogic Fast!UTIL
                      Select Host Adapter
   ----------------------------------------------------------
   Adapter Type     Address   Slot   Bus   Device   Function
    
   QLE8152          E800      01     05    00       2
   QLE8152          EC00      01     05    00       30
   

3. Use the Arrow key to highlight the Converged Network Adapter port that has connected devices and press Enter.

   The QLogic Fast!UTIL menu is displayed as shown in the following example.

                      QLogic Fast!UTIL
                      Selected Adapter
   ----------------------------------------------------------
   Adapter Type     Address   Slot   Bus   Device   Function
   QLE8152          E800      01     05    00       2
    
   ----------------------------------------------------------
      Fast!UTIL Options
    
                           Configuration Settings
                           Scan Fibre Devices
                           Fibre Disk Utility
                           Loopback Data Test
                           Select Host Adapter
                           Exit Fast!UTIL
   

4. Use the Arrow key to highlight Scan Fibre Devices and press Enter.

   The following example shows a storage JBOD with seven targets attached to one port of a dual-port Converged Network Adapter.

                         QLogic Fast!UTIL
    
   Scan Fibre Channel Loop
    
   ID  Vendor  Product           Rev    Port Name        Port ID
    
   0   SEAGATE ST336752FSUN36G   0205   21000004CF64C8E0 0000CC
   1   SEAGATE ST336752FSUN36G   0205   21000004CF6493D0 0000CB
   2   SEAGATE ST336752FSUN36G   0205   21000004CF6428C4 0000CA
   3   SEAGATE ST336752FSUN36G   0205   21000004CF64C5B2 0000C9
   4   SEAGATE ST336752FSUN36G   0205   21000004CF6096F0 0000C7
   5   SEAGATE ST336752FSUN36G   0205   21000004CF648010 0000C6
   6   SUN     StorEdge 3510F    D1046  215000C0FF00225B 0000CD
   7   No device present
   8   No device present
   9   No device present
   10  No device present
   11  No device present
   12  No device present
   13  No device present
   14  No device present
   15  No device present
   

5. To exit the QLogic Fast!UTIL, press the Escape key.

   The following QLogic Fast!UTIL menu is displayed.

                      QLogic Fast!UTIL
                      Selected Adapter
    
   ----------------------------------------------------------
   Adapter Type     Address   Slot   Bus   Device   Function
   QLE8152          E800      01     05    00       2
    
   ----------------------------------------------------------
      Fast!UTIL Options
    
                           Configuration Settings
                           Scan Fibre Devices
                           Fibre Disk Utility
                           Loopback Data Test
                           Select Host Adapter
                           Exit Fast!UTIL
    
   

6. Highlight Exit Fast!UTIL and press Enter.

   The following QLogic Fast!UTIL menu is displayed.

                      QLogic Fast!UTIL
    
   Exit Fast!UTIL
   ----------------------------------
    
                           Reboot System
                           Return to Fast!UTIL