Bug 15632822
Issue:
You might encounter this error message after issuing the luxadm -e forcelip command from a system with the following configuration:
Oracle Solaris 10 10/09 OS running
Adapter installed and connected to a Brocade 8000 FCoE switch
Brocade 8000 FCoE switch connected to a tape zone on a FC SAN with an SL48-LTO4 FC tape library
If you issue the luxadm -e forcelip command upon the removal of a device from the tape zone, this message might be generated:
Error: FCIO_RESET_LINK ioctl failed. Could not reset the loop
Workaround:
To avoid encountering the error message, manually unconfigure the unusable device (the device removed from the tape zone) at the attachment point of the device:
In this example, the attachment point of the unusable device is c1.
> cfgadm -al c1 Ap_Id Type Receptacle Occupant Condition c1 fc-fabric connected configured unknown c1::12340080e512b600 disk connected configured unknown c1::123400a0b82804a6 disk connected configured unusable c1::123410a0008beb2a tape connected configured unknown >
> cfgadm -c unconfigure -o unusable_SCSI_LUN c1