Documentation, Support, and Training
Evaluating Product Compatibility
Form-Factor Physical Characteristics
Advanced Mezzanine Card Support
Advanced Rear Transition Module Support
Warranty and Technical Support
Preparing to Install the Blade Server
Installing Components and Blade Server
Installing Optional Components
Software and Firmware Upgrades
Software and Firmware Upgrades
Administering Parameters and Configurations
Administering User Accounts and Security
The blade server’s primary features are as follows:
ATCA card 322.25 mm x280 mm, 1.2-inch slot height
Two Intel LC5518 Processor Sockets, QuadCore version at 1.72 GHz and up to 50W per CPU
Intel Ibex Peak I/O PCH
Slots for DDR3 (registered, ECC) at 1067 MHz, 8 modules per card, up to 8 GB per DIMM, in very low-profile design
Two 1000MBASE-T Ethernet base fabric (PICMG 3.0) interface ports (using Intel 82576 embedded version controller) from PCIe x4
Two 10/100/1000MbaseT Ethernet management ports (using Intel 82576EB controller) from PCIe x4
Two 10 Gb XAUI Ethernet extended fabric (PICMG 3.1) interface ports (using Intel 82599 controller) from PCIe x8
One AMC.1 Type 8S2E2 expansion slot (PCIe x8) supporting I/O expansion with signaling to the ARTM
One Asynchronous RS-232 serial port (RJ-45) routed to front panel and ARTM from SuperIO
Dual USB 2.0 and 1.1 ports on front panel
SATA to EIDE master to support one IDE Compact Flash Type II socket for 16 GB of user flash. The socket is accessible only when the blade server is removed from chassis.
Redundant SPI BIOS, 32 Mb
Management support using on-board IPM controller (Renesas H8) that provides dual IPMB. The IPMB bus is monitored by the shelf manager, providing redundant IPMI channels.
Rear I/O expansion and connectivity provided to an optional ARTM. Compatible with Oracle’s current ARTM architecture with upgrade capability to support PICMG working group ARTM.0 standard (Zone 3 Interface)
SAS connectivity from ARTM to AMC slot
TPM chip
225W delivered max power for the complete card (including 25W ARTM) via dual, redundant -48 VDC nominal rails
NEBS certified compliant in Oracle’s Sun Netra CT 900 server system