Chapter 2 Hardware Installation and Removal
Observing ESD and Handling Precautions
Connecting the Cables to the HBA
To Connect the Cables to the HBA
Fibre Channel LED Indicator Status
Power and Attention Switch LED Scheme
Configuring the HBA for Hot-Plug Operation
To Configure the HBA for Hot-Plug Operation
To Test the Installation for the Oracle Solaris OS
Testing the Installation for the Windows OS
Testing the Installation for the VMware Technology
To Prepare the HBA for Removal Using the HBA Attention Button
To Prepare the HBA for Hot-Plug Removal Using the Oracle Solaris OS
See LED Locations to determine the LED locations.
Each port has a corresponding set of LEDs that provide a visual indication of the operating state.
Figure 2-3 LED Locations
1 Blue LED (Fibre Channel)
2Green LED (Fibre Channel)
3Amber LED (Fibre Channel)
4Attention button
5Green/Orange LED (Ethernet)
6Ethernet ports (GbE port 2 on top, port 1 below)
7Yellow LED (Ethernet)
8Fibre channel ports (FC port 1 on top, port 2 below)
9Power LED
10Attention LED