Ethernet LED Indicator Status - StorageTek Dual 8 Gb FC Dual GbE ExpressModule HBA From QLogic Installation Guide

Skip Navigation Links
Exit Print View
	StorageTek Dual 8 Gb FC Dual GbE ExpressModule HBA From QLogic Installation Guide For HBA Models SG-PCIEFCGBE-Q8-Z, SG-XPCIEFCGBE-Q8-Z, SG-PCIEFCGBE-Q8-N, and SG-XPCIEFCGBE-Q8-N

Oracle Technology Network

Document Information

Using This Documentation

Chapter 1 HBA Overview

Chapter 2 Hardware Installation and Removal

Observing ESD and Handling Precautions

Installing the Hardware

To Install the HBA

Connecting the Cables to the HBA

To Connect the Cables to the HBA

To Power On the HBA

LED Descriptions and Status

LED and Switch Locations

Fibre Channel LED Indicator Status

Ethernet LED Indicator Status

Power and Attention Switch LED Scheme

Configuring the HBA for Hot-Plug Operation

To Configure the HBA for Hot-Plug Operation

Testing the Installation

To Test the Installation for the Oracle Solaris OS

Testing the Installation for the Windows OS

Testing the Installation for the VMware Technology

Removing the Hardware

To Prepare the HBA for Removal Using the HBA Attention Button

To Prepare the HBA for Hot-Plug Removal Using the Oracle Solaris OS

To Remove the HBA

Chapter 3 Software Installation

Chapter 4 Known Issues

Ethernet LED Indicator Status

Ethernet LED Indicator Status Definitions summarizes the Ethernet LED indicator combinations (LEDs 5 and 7 in LED Locations).

Table 2-2 Ethernet LED Indicator Status Definitions

Top LED (Link/Speed)		Bottom LED (Link/Activity)	Hardware State	Speed
Green LED	Orange LED	Yellow LED	Hardware State	Speed
Off	Off	Off	Power on, link is down	All
Off	Off	On	Power on, link is up	10 Mbit
Off	On	On		100 Mbit
On	Off	On		GbE
Off	Off	Blinking	Network activity	10 Mbit
Off	On	Blinking		100 Mbit
On	Off	Blinking		GbE

Copyright © 2011, 2012, 2013, 2014, 2105, Oracle and/or its affiliates. All rights reserved. Legal Notices

Previous

Next