Installing a DSIMM

1. Take the replacement DSIMM from the antistatic container.

2. Position the DSIMM in the socket so the notch is on the same side as the lever (Figure 2-21).

   ---

   Note -

   The replacement DSIMM should have the same capacity as the defective DSIMM.

   ---

3. Insert the DSIMM into the socket by pushing it down at both ends until it is fully seated in the socket (Figure 2-21).

   Figure 2-21 Replacing a DSIMM

   
   

4. Go to "Finishing Up".