Figures

FIGURE 1-1 Sun StorEdge 3510 FC Array Front View

FIGURE 4-1 Front Bezel and Front Bezel Locks of an Array

FIGURE 4-2 Sequence of Steps to Change Front Bezel Locks So Keys Cannot Be Removed

FIGURE 4-3 Hardware Connections on the Back of a Dual-Controller FC Array

FIGURE 4-4 Installed Cord Lock

FIGURE 4-5 Front Panel With LEDs Displayed

FIGURE 4-6 Dedicated Drive Channels 2 (on the Upper Controller) and 3 (on the Lower Controller) in a Dual-Controller Array

FIGURE 4-7 Host Channels on a Dual-Controller Array

FIGURE 4-8 Default Dual-Controller SFP Placement

FIGURE 4-9 Default Single-Controller SFP Placement

FIGURE 4-10 Default JBOD Expansion Unit SFP Placement

FIGURE 4-11 Typical SFP Connector Used to Connect Cables to Chassis SFP Ports

FIGURE 4-12 RAID Array Attached to Two Hosts and Two Expansion Units

FIGURE 4-13 Front Bezel and Front Bezel Locks of an Array

FIGURE 4-14 ID Switch Located on the Left Front Side of the Array or Expansion Unit

FIGURE 5-1 A Point-to-Point Configuration With a Dual-Controller Array and Two Switches

FIGURE 5-2 A DAS Configuration With Four Servers, a Dual-Controller Array, and Two Expansion Units

FIGURE 5-3 Firmware Main Menu

FIGURE 5-4 Example of an Allocation of Local and Spare Drives in Logical Configurations

FIGURE 5-5 Partitions in Logical Configurations

FIGURE 5-6 Mapping Partitions to Host ID/LUNs

FIGURE 5-7 Example of LUN Filtering

FIGURE 6-1 Front Panel LEDs

FIGURE 6-2 Chassis Ear LEDs and Reset Button on Front Panel

FIGURE 6-3 I/O Controller Module and Battery Module LEDs

FIGURE 6-4 I/O Expansion Module for an Expansion Unit

FIGURE 6-5 AC Power Supply and Fan Module

FIGURE 6-6 DC Power Supply and Fan Module

FIGURE 7-1 Cooling Fan Locations

FIGURE 8-1 Automatic Rebuild

FIGURE 8-2 Manual Rebuild

FIGURE 8-3 Flashing the Drive LED of a Selected Drive

FIGURE 8-4 Flashing All Drive LEDs to Detect a Defective Non-Flashing Drive

FIGURE 8-5 Flashing All Drive LEDs Except a Selected Drive LED

FIGURE 8-6 Cooling Fan Locations

FIGURE 8-1 Power Supply or Fan Module Flowchart, 1 of 2

FIGURE 8-2 Power Supply or Fan Module Flowchart, 2 of 2

FIGURE 8-3 FC Drive LEDs Flowchart, 1 of 2

FIGURE 8-4 FC Drive LEDs Flowchart, 2 of 2

FIGURE 8-5 Front Panel LEDs (FC) Flowchart, 1 of 4

FIGURE 8-6 Front Panel LEDs Flowchart, 2 of 4

FIGURE 8-7 Front Panel LEDs Flowchart, 3 of 4

FIGURE 8-8 Front Panel LEDs Flowchart, 4 of 4

FIGURE 8-9 I/O Controller Module Flowchart

FIGURE B-1 ID Switch

FIGURE B-2 Sun StorEdge 3510 FC JBOD Array Attached to a Single HBA Port

FIGURE B-3 Sun StorEdge 3510 FC JBOD Array Attached to Two HBA Ports

FIGURE B-4 Front View of a Drive Module Pulled Out of the Chassis

FIGURE B-5 Front Panel LEDs

FIGURE B-6 Chassis Ear LEDs and Reset Button on Front Panel

FIGURE B-7 I/O Module for a Sun StorEdge 3510 FC JBOD Array

FIGURE B-8 AC Power Supply and Fan Module

FIGURE B-9 DC Power Supply and Fan Module

FIGURE B-10 JBOD or Expansion Unit Flowchart 1 of 2

FIGURE B-11 JBOD or Expansion Unit Flowchart 2 of 2

FIGURE E-1 Ethernet RJ-45 Socket 10/100 BASE-T

FIGURE E-2 RS-232 DB9 (EIA/TIA 574) View of the Male End

FIGURE F-1 RAID Array COM Port Connected Locally to the Serial Port of a Workstation

FIGURE F-2 Worldwide Name Information Displayed by the luxadm command.

FIGURE I-1 RAID Array COM Port Connected Locally to the Serial Port of a Host System

FIGURE I-2 Network Address Corresponding to WWN

FIGURE J-1 RAID Array COM Port Connected Locally to the Serial Port of a Host System