JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Blade X6275 M2 Server Module Product Notes
search filter icon
search icon

Document Information

Using This Documentation

Product Information Web Site

Related Books

About This Documentation (PDF and HTML)

Documentation Comments

Contributors

Change History

Overview of the Sun Blade X6275 M2 Server Module Product Notes

System Software Release Features

Firmware Release History

Supported Hardware

Supported Operating Systems

Integrated Lights Out Manager (ILOM)

Additional Software

Hardware, Firmware, and BIOS Issues

Hardware, Firmware, and BIOS Current Issues

Care and Handling of Server Modules with FMods

Setup and Power-On Recommendations for the Sun Blade 6000 Modular System Chassis

Setup and Power-on Recommendations With an Empty System Chassis

Setup and Power-on Recommendations With a Preconfigured System Chassis

PCIe Link Speed Reduced With BIOS 10.2.6.0 (6994690)

PC-Check 6.27s Does Not Recognize Mellanox 10GbE Chip (6992284)

Performance Degradation When BIOS Hardware Prefetcher is Enabled

Identifying a Node's Onboard Device Versus a Node's PCIe EM (7072665)

Management and ILOM Issues

Management and ILOM Current Issues

Linux Issues

Linux Current Issues

Oracle Solaris Issues

Oracle Solaris Current Issues

Windows Issues

Windows Current Issues

Documentation Issues

Documentation Current Issues

Setup and Power-On Recommendations for the Sun Blade 6000 Modular System Chassis

The recommended setup and power-on method for the Sun Blade 6000 modular system chassis with Sun Blade X6275 M2 server modules is different depending on whether you are starting with an empty system chassis, or a pre-configured system chassis.

Follow the recommended procedure for your installation as described below for one of the following situations: