Diagnostic Support for All Other Supported Operating Systems

Language:

Diagnostic support for the HBA with all supported operating systems other than the Oracle Solaris OS is available through version 11.1.218.x, or newer, of the OneCommand Manager application graphical user interface (GUI) or the OneCommand Manager application command-line interface (CLI) application. These applications support the following functions:

Discover local and remote hosts, HBAs, targets, and LUNs.
Reset HBAs.
Set HBA driver parameters.
Update firmware.
Enable or disable the system BIOS.
Run diagnostic tests on HBAs.
Manage out-of-band HBAs.
Manage local and in-band remote HBAs.

For detailed information about performing any of these functions through the OneCommand Manager applications, see the Emulex OneCommand Manager application documentation, located at the Oracle support area of the Emulex web site: https://www.broadcom.com/support/download-search/?pg=Storage+Adapters,+Controllers,+and+ICs&pf=Fibre+Channel+Host+Bus+Adapters&pn=&po=Oracle&pa=&dk=

To Install Diagnostic Support Utilities for a Supported OS Other Than the Oracle Solaris OS:

Go to the Emulex (now Broadcom) support site for Oracle at:
https://www.broadcom.com/support/oem/oracle-fc/
Click the type of HBA, and then click the model number of the HBA for which you want to install diagnostic software.
In the Utilities section, click the diagnostic support utility for the OS that you want, and download the diagnostic utility to a local file system.
Install the diagnostic utility as described in the Emulex documentation, located on the Emulex (Broadcom) web site.