Sun Storage 16 Gb Fibre Channel ExpressModule Host Bus Adapter, Emulex Installation Guide For HBA Model 7101690

To Prepare the HBA for Removal Using the Attention (ATTN) Button

1. Attach an antistatic strap to your wrist.

   For more information, refer to Observing ESD and Handling Precautions.

2. Press and release the Attention (ATTN) button near the bottom of the HBA front panel (see LEDs and Attention (ATTN) Button).

   The green OK/Power LED near the button will blink for approximately five seconds, indicating that the HBA is being prepared for removal.

   If you want to cancel the operation, press the Attention (ATTN) button again before the LED stops blinking.

3. After the OK/Power LED goes dark, remove the HBA, as described in To Remove the HBA Hardware.