Sun Storage 16 Gb Fibre Channel ExpressModule Host Bus Adapter, Emulex Installation Guide For HBA Model 7101690

To Prepare the HBA for Hot-Plug Removal (Oracle Solaris)

If you want to remove the HBA without first halting the operating system and removing power from the associated system, prepare the HBA for removal as follows:

1. Use the cfgadm command to identify the HBA to be removed.

   cfgadm
   	   Ap_Id               Type         Receptacle   Occupant     Condition
   	   pcie5               fibre/hp     connected    configured   ok
   	   pcie6               fibre/hp     connected    configured   ok
   

2. Use the cfgadm -c unconfigure command to unconfigure the attachment point ID (Ap_Id) for the HBA.
3. Use the cfgadm -c disconnect command to prepare the HBA for removal.

   A flashing OK/Power LED indicates that the HBA is being prepared for removal. A dark OK/Power LED indicates that the HBA is ready to be removed, as described in To Remove the HBA Hardware.