Chapter 1 Oracle ZFS Storage Appliance Overview
Chapter 3 Initial Configuration
Performing Initial Configuration Using the BUI
Chapter 4 Network Configuration
Chapter 5 Storage Configuration
Chapter 6 Storage Area Network Configuration
Chapter 8 Setting ZFSSA Preferences
Chapter 10 Cluster Configuration
Chapter 12 Shares, Projects, and Schema
You use the CLI to perform the initial configuration sections. Each step begins by printing its help, which can be reprinted by typing help. Use the done command to complete each step.
Login using the password you provided during Installation in Oracle ZFS Storage Appliance Installation Guide :
caji console login: root Password: Last login: Sun Oct 19 02:55:31 on console To setup your system, you will be taken through a series of steps; as the setup process advances to each step, the help message for that step will be displayed. Press any key to begin initial configuration ...
In this example, the existing settings are checked (which were obtained from the DHCP server), and accepted by typing done. To customize them at this point, enter each context (datalinks, devices and interfaces) and type help to see available actions for that context. See the Chapter 4, Network Configuration section for additional documentation. Pay careful attention to the Clustering Considerations for Networking section if you will configure clustering.
aksh: starting configuration with "net" ... Configure Networking. Configure the appliance network interfaces. The first network interface has been configured for you, using the settings you provided at the serial console. Subcommands that are valid in this context: datalinks => Manage datalinks devices => Manage devices interfaces => Manage interfaces help [topic] => Get context-sensitive help. If [topic] is specified, it must be one of "builtins", "commands", "general", "help" or "script". show => Show information pertinent to the current context abort => Abort this task (potentially resulting in a misconfigured system) done => Finish operating on "net" caji:maintenance system setup net> devices show Devices: DEVICE UP MAC SPEED igb0 true 0:14:4f:8d:59:aa 1000 Mbit/s igb1 false 0:14:4f:8d:59:ab 0 Mbit/s igb2 false 0:14:4f:8d:59:ac 0 Mbit/s igb3 false 0:14:4f:8d:59:ad 0 Mbit/s caji:maintenance system setup net> datalinks show Datalinks: DATALINK CLASS LINKS LABEL igb0 device igb0 Untitled Datalink caji:maintenance system setup net> interfaces show Interfaces: INTERFACE STATE CLASS LINKS ADDRS LABEL igb0 up ip igb0 192.168.2.80/22 Untitled Interface caji:maintenance system setup net> done
Refer to the DNS section for additional documentation about DNS.
Configure DNS. Configure the Domain Name Service. Subcommands that are valid in this context: help [topic] => Get context-sensitive help. If [topic] is specified, it must be one of "builtins", "commands", "general", "help", "script" or "properties". show => Show information pertinent to the current context commit => Commit current state, including any changes abort => Abort this task (potentially resulting in a misconfigured system) done => Finish operating on "dns" get [prop] => Get value for property [prop]. ("help properties" for valid properties.) If [prop] is not specified, returns values for all properties. set [prop] => Set property [prop] to [value]. ("help properties" for valid properties.) For properties taking list values, [value] should be a comma-separated list of values. caji:maintenance system setup dns> show Properties: <status> = online domain = sun.com servers = 192.168.1.4 caji:maintenance system setup dns> set domain=sf.fishworks.com domain = sf.fishworks.com (uncommitted) caji:maintenance system setup dns> set servers=192.168.1.5 servers = 192.168.1.5 (uncommitted) caji:maintenance system setup dns> commit caji:maintenance system setup dns> done aksh: done with "dns", advancing configuration to "ntp" ...
Configure Network Time Protocol (NTP) to synchronize the appliance time clock. See the NTP section for additional documentation.
Configure Time. Configure the Network Time Protocol. Subcommands that are valid in this context: help [topic] => Get context-sensitive help. If [topic] is specified, it must be one of "builtins", "commands", "general", "help", "script" or "properties". show => Show information pertinent to the current context commit => Commit current state, including any changes abort => Abort this task (potentially resulting in a misconfigured system) done => Finish operating on "ntp" enable => Enable the ntp service disable => Disable the ntp service get [prop] => Get value for property [prop]. ("help properties" for valid properties.) If [prop] is not specified, returns values for all properties. set [prop] => Set property [prop] to [value]. ("help properties" for valid properties.) For properties taking list values, [value] should be a comma-separated list of values. caji:maintenance system setup ntp> set servers=0.pool.ntp.org servers = 0.pool.ntp.org (uncommitted) caji:maintenance system setup ntp> commit caji:maintenance system setup ntp> done aksh: done with "ntp", advancing configuration to "directory" ...
Refer to the NIS, LDAP and Active Directory sections for additional documentation.
Configure Name Services. Configure directory services for users and groups. You can configure and enable each directory service independently, and you can configure more than one directory service. Subcommands that are valid in this context: nis => Configure NIS ldap => Configure LDAP ad => Configure Active Directory help [topic] => Get context-sensitive help. If [topic] is specified, it must be one of "builtins", "commands", "general", "help" or "script". show => Show information pertinent to the current context abort => Abort this task (potentially resulting in a misconfigured system) done => Finish operating on "directory" caji:maintenance system setup directory> nis caji:maintenance system setup directory nis> show Properties: <status> = online domain = sun.com broadcast = true ypservers = caji:maintenance system setup directory nis> set domain=fishworks domain = fishworks (uncommitted) caji:maintenance system setup directory nis> commit caji:maintenance system setup directory nis> done caji:maintenance system setup directory> done aksh: done with "directory", advancing configuration to "support" ...
Configure storage pools that are characterized by their underlying data redundancy, and provide space that is shared across all filesystems and LUNs. See the Chapter 5, Storage Configuration section for additional documentation.
Configure Storage. Subcommands that are valid in this context: help [topic] => Get context-sensitive help. If [topic] is specified, it must be one of "builtins", "commands", "general", "help", "script" or "properties". show => Show information pertinent to the current context commit => Commit current state, including any changes done => Finish operating on "storage" config <pool> => Configure the storage pool unconfig => Unconfigure the storage pool add => Add additional storage to the storage pool import => Search for existing or destroyed pools to import scrub <start|stop> => Start or stop a scrub get [prop] => Get value for property [prop]. ("help properties" for valid properties.) If [prop] is not specified, returns values for all properties. set pool=[pool] => Change current pool caji:maintenance system setup storage> show Properties: pool = pool-0 status = online profile = mirror log_profile = - cache_profile = - caji:maintenance system setup storage> done aksh: done with "storage", advancing configuration to "support" ...
Refer to (Phone Home) for additional documentation of remote support configuration.
Remote Support. Register your appliance and configure remote monitoring. Subcommands that are valid in this context: tags => Configure service tags scrk => Configure phone home help [topic] => Get context-sensitive help. If [topic] is specified, it must be one of "builtins", "commands", "general", "help" or "script". show => Show information pertinent to the current context abort => Abort this task (potentially resulting in a misconfigured system) done => Finish operating on "support" caji:maintenance system setup support> done aksh: initial configuration complete!