Managing SAN Devices and I/O Multipathing in Oracle^® Solaris 11.4

Language:

Managing SAN Devices and I/O Multipathing in Oracle^® Solaris 11.4

November 2020

Provides an overview of Oracle Solaris I/O multipathing features and describes how to configure Oracle Solaris iSCSI initiator, Fibre Channel over Ethernet (FCoE) ports, storage area network (SAN) devices, and serial-attached SCSI (SAS) domains.

Document Information
Using This Documentation
- Product Documentation Library
- Feedback
1 About Oracle Solaris Storage Stack
- I/O Communication Between Oracle Solaris Storage Stack Components
2 About Oracle Solaris I/O Multipathing
- Oracle Solaris I/O Multipathing Features and Benefits
  - Oracle Solaris I/O Multipathing Features
  - Benefits of Oracle Solaris I/O Multipathing
- Disk Storage Devices and Device Standards
3 Configuring Oracle Solaris I/O Multipathing Features
4 Configuring Fibre Channel Devices
5 Configuring an Oracle Solaris iSCSI Initiator
6 Configuring SAS Devices
- Dynamic Discovery of SAS Devices
- Displaying SAS Configuration Information
7 Persistent Binding for Tape Devices
- About Persistent Binding
- Creating Tape Links
  - How to Create Tape Device Links
Appendix A Manual Configuration for Fibre Channel Devices
Appendix B Troubleshooting Multipathing Problems
- System Fails to Boot or Crashes During stmsboot
  - How to Recover Boot Failure in Single User Mode
  - How to Recover From a System Crash
Appendix C Tuning Disk Target Driver Properties
Appendix D Supported HBAs in FC or FCoE Mode
- Supported HBAs in FC or FCoE Mode
Index

Managing SAN Devices and I/O Multipathing in Oracle® Solaris 11.4

Managing SAN Devices and I/O Multipathing in Oracle® Solaris 11.4

November 2020

Managing SAN Devices and I/O Multipathing in Oracle^® Solaris 11.4

Managing SAN Devices and I/O Multipathing in Oracle^® Solaris 11.4