Change a SEFOS User Privilege Level
Configure Network Management From the Web Interface
Configure Network Management From the CLI
Log Out of the Oracle ILOM CLI
Configuring the SEFOS Environment
Enable or Disable the Timeout for Line Connections
Configure the Default IP Address
Configure the IP Address for an Interface
Configure the Name of the Configuration File
Enable or Disable Trap Generation on an Interface
Save the Configuration to a File
Copy a Configuration File to a Remote Location
Copy a Configuration File From a Remote Location to Flash
Copy a Configuration File From One Remote Location or Flash to Another Remote Location or Flash
Copy a System Log to a Remote Location
Configuring the Switching Feature
Configuring the Routing Feature
Configure Static Unicast Route Entries
The instructions in this topic assume that you are connecting to Oracle ILOM using a serial connection directly to the switch. For SER MGT pinout, baud rate, and parity information, refer to Switch Installation, SER MGT port.
This action establishes the connection between the terminal device and the switch Oracle ILOM. The switch Oracle ILOM login prompt appears.
SUNSPnnnnnnnnnn login:
The default user is root and the default password is changeme. Once you have successfully logged in, the switch displays the Oracle ILOM default command prompt.
->