Change a SEFOS User Privilege Level
Configure Network Management From the Web Interface
Configure Network Management From the CLI
Log Out of the Oracle ILOM CLI
Configuring the SEFOS Environment
Enable or Disable the Timeout for Line Connections
Configure the Default IP Address
Configure the IP Address for an Interface
Configure the Name of the Configuration File
Enable or Disable Trap Generation on an Interface
Copy a Configuration File to a Remote Location
Copy a Configuration File From a Remote Location to Flash
Copy a Configuration File From One Remote Location or Flash to Another Remote Location or Flash
Copy a System Log to a Remote Location
Configuring the Switching Feature
Configuring the Routing Feature
Configure Static Unicast Route Entries
This task describes how to write the running configuration to a flash file, a startup configuration file, or a remote site.
See Connect to SEFOS.
SEFOS-1# write startup-config
SEFOS-1# show nvram ... Config Restore Option : Restore Config Save Option : Startup save ...
SEFOS-1# show system information ... Config Restore Status : Not Initiated
If you do not want to reboot the switch at this time, you do not have to complete the last step in this task.
The Config Restore Status shows Successful after the reboot.
SEFOS-1# show system information ... Config Restore Status : Successful