Go to main content

SPARC T7 Series Servers Administration Guide

Exit Print View

Updated: August 2017
 
 

Disable or Enable Network Access to the SP

By default, network access to the SP is enabled and DHCP is used to obtain an IP address for the SP. You can disable or enable network access.

  • At the Oracle ILOM prompt, type:
    -> set /SP/network state=value
    

    where value can be:

    enabled

    (Default) The SP can be accessed from the network.

    disabled

    The SP cannot be accessed from the network. You can only use the SER MGT serial connection.

Related Information