This procedure describes how to change the SP management port to an in-band (or sideband) host network port.
Refer to the installation guide for your server to connect to the SER MGT port.
For instructions, refer to the information about assigning a static IP address in the installation guide for the server.
-> show /SP/network
For example, in the output, you might find these properties:
managementport = MGMT ... pendingmanagementport = MGMT ...
MGMT indicates the NET MGT port is the current port for the SP.
Specify a sideband port that has an active LAN connection.
-> set /SP/network pendingmanagementport=port
where port can be NET0, NET1, NET2, or NET3 for a sideband port.
->set /SP/network commitpending=true
-> show /SP/network
For example, in the output, you might find these new properties:
managementport = NET0 ... pendingmanagementport = NET0