CLI を使用した FC の構成

FC ポートのモードの変更

dory:configuration san fc targets> set targets="wwn.2101001B32A11639"
                      targets = wwn.2101001B32A11639 (uncommitted)
dory:configuration san fc targets> commit

検出された FC ポートの表示

dory:configuration san fc targets> show
Properties:
                      targets = wwn.2100001B32811639,wwn.2101001B32A12239
Targets:
NAME       MODE       WWN                     PORT                 SPEED
target-000 target     wwn.2100001B32811639    PCIe 5: Port 1       4 Gbit/s
target-001 initiator  wwn.2101001B32A11639    PCIe 5: Port 2       0 Gbit/s
target-002 initiator  wwn.2100001B32812239    PCIe 2: Port 1       0 Gbit/s
target-003 target     wwn.2101001B32A12239    PCIe 2: Port 2       0 Gbit/s
dory:configuration san fc targets> select target-000
dory:configuration san fc targets target-000> show
Properties:
                          wwn = wwn.2100001B32811639
                         port = PCIe 5: Port 1
                         mode = target
                        speed = 4 Gbit/s
             discovered_ports = 6
           link_failure_count = 0
           loss_of_sync_count = 0
         loss_of_signal_count = 0
         protocol_error_count = 0
        invalid_tx_word_count = 0
            invalid_crc_count = 0
Ports:
PORT      WWN                   ALIAS              MANUFACTURER
port-000  wwn.2100001B3281A339  longjaw-1          QLogic Corporation
port-001  wwn.2101001B32A1A339  longjaw-2          QLogic Corporation
port-002  wwn.2100001B3281AC39  thicktail-1        QLogic Corporation
port-003  wwn.2101001B32A1AC39  thicktail-2        QLogic Corporation
port-004  wwn.2100001B3281E339  <none>             QLogic Corporation
port-005  wwn.2101001B32A1E339  <none>             QLogic Corporation

FC イニシエータグループの作成

dory:configuration san fc initiators> create
dory:configuration san fc initiators (uncommitted)> set name=lefteye
dory:configuration san fc initiators (uncommitted)> 
    set initiators=wwn.2101001B32A1AC39,wwn.2100001B3281AC39
dory:configuration san fc initiators (uncommitted)> commit
dory:configuration san fc initiators> list
GROUP     NAME
group-001 lefteye
         |
         +-> INITIATORS
             wwn.2101001B32A1AC39
             wwn.2100001B3281AC39

LUN と FC イニシエータグループとの関連付け

次の例は、lefty という名前の LUN を作成し、それを fera イニシエータグループに関連付ける方法を示しています。

dory:shares default> lun lefty
dory:shares default/lefty (uncommitted)> set volsize=10
                      volsize = 10 (uncommitted)
dory:shares default/lefty (uncommitted)> set initiatorgroup=fera
               initiatorgroup = default (uncommitted)
dory:shares default/lefty (uncommitted)> commit

イニシエータとイニシエータグループの別名のスクリプト作成

次のスクリプト例を変更する方法および使用する方法については、CLI の使用法および単純な CLI スクリプトとコマンドのバッチ処理のセクションを参照してください。

script
     /*
      * This script creates both aliases for initiators and initiator
      * groups, as specified by the below data structure.  In this
      * particular example, there are five initiator groups, each of
      * which is associated with a single host (thicktail, longjaw, etc.),
      * and each initiator group consists of two initiators, each of which
      * is associated with one of the two ports on the FC HBA.  (Note that
      * there is nothing in the code that uses this data structure that
      * assumes the number of initiators per group.)
      */
      groups = {
               thicktail: {
                      'thicktail-1': 'wwn.2100001b3281ac39',
                      'thicktail-2': 'wwn.2101001b32a1ac39'
               },
               longjaw: {
                       'longjaw-1': 'wwn.2100001b3281a339',
                       'longjaw-2': 'wwn.2101001b32a1a339'
               },
               tecopa: {
                       'tecopa-1': 'wwn.2100001b3281e339',
                       'tecopa-2': 'wwn.2101001b32a1e339'
               },
               spinedace: {
                       'spinedace-1': 'wwn.2100001b3281df39',
                       'spinedace-2': 'wwn.2101001b32a1df39'
               },
               fera: {
                       'fera-1': 'wwn.2100001b32817939',
                       'fera-2': 'wwn.2101001b32a17939'
               }
       };
       for (group in groups) {
               initiators = [];
               for (initiator in groups[group]) {
                       printf('Adding %s for %s ... ',
                           groups[group][initiator], initiator);
                           try {
                               run('select alias=' + initiator);
                               printf('(already exists)\n');
                               run('cd ..');
                           } catch (err) {
                               if (err.code != EAKSH_ENTITY_BADSELECT)
                                       throw err;
                               run('create');
                               set('alias', initiator);
                               set('initiator', groups[group][initiator]);
                               run('commit');
                               printf('done\n');
                       }
                       run('select alias=' + initiator);
                       initiators.push(get('initiator'));
                       run('cd ..');
               }
               printf('Creating group for %s ... ', group);
               run('groups');
               try {
                       run('select name=' + group);
                       printf('(already exists)\n');
                       run('cd ..');
               } catch (err) {
                       if (err.code != EAKSH_ENTITY_BADSELECT)
                               throw err;
                       run('create');
                       set('name', group);
                       run('set initiators=' + initiators);
                       run('commit');
                       printf('done\n');
               }
               run('cd ..');
       }