Oracle® Fusion Middleware
Part 6. Content Filtering

API Gateway Explorer can check that XML messages conform to the structure or format expected by the Web service by validating those requests against XML schemas. An XML schema precisely defines the elements and attributes that constitute an instance of an XML document. It also specifies the data types of these elements to ensure that only appropriate data is allowed through to the Web service.

For example, an XML schema might stipulate that all requests to a particular Web service must contain a <name> element, which contains at most a ten character string. If the API Gateway Explorer receives a message with an improperly formed <name> element, it rejects the message.

You can find the Schema Validation filter in the Content Filtering category of filters in Policy Studio. Drag and drop the filter on to a policy to perform schema validation.

Configure the following general settings:

Name:

Enter an appropriate name for the filter.

To configure the XML schema to validate messages against, click the Schema to use tab. You can select to use either a schema from the WSDL for the current Web service, or a specific schema from the global cache of WSDL and XML schema documents.

To configure which part of the message to validate, click the Part of message to match tab.

A portion of the XML message can be extracted using an XPath expression. API Gateway Explorer can then validate this portion against the specified XML schema. For example, you might need to validate only the SOAP Body element of a SOAP message. In this case, enter or select an XPath expression that identifies the SOAP Body element of the message. This portion should then be validated against an XML schema that defines the structure of the SOAP Body element for that particular message.

Click the Add or Edit buttons to add or edit an XPath expression using the Enter XPath Expression dialog. To remove an expression select the expression in the XPath Expression field and click the Delete button.

You can configure XPath expressions manually or using a wizard. For more details, see the Configuring XPath Expressions topic.

The following settings are available on the Advanced tab:

Allow RPC Schema Validation:

When the Allow RPC Schema Validation check box is selected, the filter makes a best attempt to validate an RPC-encoded SOAP message. An RPC-encoded message is defined in the WSDL as having an operation with the following characteristics:

For details on the possible values for these attributes, see Section 3.5 of the WSDL specification.

The problem with RPC-encoded SOAP messages in terms of schema validation is that the schema contained in the WSDL file does not necessarily fully define the format of the SOAP message, unlike with document-literal style messages. With an RPC-encoded operation, the format of the message can be defined by a combination of the SOAP operation name, WSDL message parts, and schema-defined types. As a result, the schema extracted from a WSDL file might not be able to validate a message.

Another problem with RPC-encoded messages is that type information is included in each element that appears in the SOAP message. For such element definitions to be validated by a schema, the type declarations must be removed, which is precisely what the Schema Validation filter does if the check box is selected on this tab. It removes the type declarations and then makes a best attempt to validate the message.

However, as explained earlier, if some of the elements in the SOAP message are taken from the WSDL file instead of the schema (for example, when the SOAP operation name in the WSDL file is used as the wrapper element beneath the SOAP Body element instead of a schema-defined type), the schema is not able to validate the message.

Inline MTOM Attachments into Message:

Message Transmission Optimization Mechanism (MTOM) provides a way to send binary data to Web services in standard SOAP messages. MTOM leverages the include mechanism defined by XML Optimized Packaging (XOP), whereby binary data can be sent as a MIME attachment (similar to SOAP with Attachments) to a SOAP message. The binary data can then be referenced from within the SOAP message using the <xop:Include> element.

The following SOAP request contains a binary image that has been Base64-encoded so that it can be inserted as the contents of the <image> element:

<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <soap:Body>
  <uploadGraphic xmlns="www.example.org">
   <image>/aWKKapGGyQ=</image>
  </uploadGraphic>
 </soap:Body>
</soap:Envelope>   

When this message is converted to an MTOM message by API Gateway the Base64-encoded content from the <image> element is replaced with an <xop:Include> element. This contains a reference to a newly created MIME part that contains the binary content. The following request shows the resulting MTOM message:

POST /services/uploadImages HTTP/1.1
Host: API Gateway Explorer
Content-Type: Multipart/Related;boundary=MIME_boundary;
    type="application/xop+xml";
    start="<mymessage.xml@example.org>";
    start-info="text/xml"

--MIME_boundary
Content-Type: application/xop+xml; 
    charset=UTF-8; 
    type="text/xml"
Content-Transfer-Encoding: 8bit
Content-ID: <mymessage.xml@example.org>

<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <soap:Body>
  <uploadGraphic xmlns="www.example.org">
   <image>
     <xop:Include xmlns:xop='http://www.w3.org/2004/08/xop/include' 
          href='cid:http://example.org/myimage.gif'/>
   </image>
  </uploadGraphic>
 </soap:Body>
</soap:Envelope>   

--MIME_boundary
Content-Type: image/gif
Content-Transfer-Encoding: binary
Content-ID: <http://example.org/myimage.gif>

// binary octets for image

--MIME_boundary

When attempting to validate the MTOM message with an XML schema, it is crucial that you are aware of the format of the <image> element. Will it contain the Base64-encoded binary data, or will it contain the <xop:include> element with a reference to a MIME part?

For example, the XML schema definition for an <image> element might look as follows:

<xsd:element name="image" maxOccurs="1" minOccurs="1"  
                type="xsd:base64Binary" 
                xmime:expectedContentTypes="*/*" 
                xsi:schemaLocation="http://www.w3.org/2005/05/xmlmime" 
                xmlns:xmime="http://www.w3.org/2005/05/xmlmime"/>
      

In this case, the XML schema validator expects the contents of the <image> element to be base64Binary. However, if the message has been formatted as an MTOM message, the <image> element contains a child element, <xop:Include> that the schema knows nothing about. This causes the schema validator to report an error and schema validation fails.

To resolve this issue, select the Inline MTOM Attachments into Message check box on the Advanced tab. At runtime, the schema validator replaces the value of the <xop:Include> element with the Base64-encoded contents of the MIME part to which it refers. This means that the message now adheres to the definition of the <image> element in the XML schema (the element contains data of type base64Binary).

This standard procedure of interpreting XOP messages is described in Section 3.2 Interpreting XOP Packages of the XML-binary Optimized Packaging (XOP) specification.

When a schema validation check fails, the validation errors are stored in the xsd.errors API Gateway message attribute. You can return an appropriate SOAP Fault to the client by writing out the contents of this message attribute.

For example, you can do this by configuring a Set Message filter (for more information, see the Set Message topic) to write a custom response message back to the client. Place the Set Message filter on the failure path of the Schema Validation filter. You can enter the following sample SOAP Fault message in the Set Message filter. Notice the use of the ${xsd.errors} message attribute selector in the <Reason> element:

<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
  <env:Body>
    <env:Fault>
      <env:Code>
        <env:Value>env:Receiver</env:Value>
        <env:Subcode>
          <env:Value xmlns:fault="http://www.Oracle.com/soapfaults">
            fault:MessageBlocked
          </env:Value>
        </env:Subcode>
      </env:Code>
      <env:Reason>
        <env:Text xml:lang="en">
          ${xsd.errors}
        </env:Text>
      </env:Reason>
      <env:Detail xmlns:fault="http://www.Oracle.com/soapfaults"
        fault:type="faultDetails">
      </env:Detail>
    </env:Fault>
  </env:Body>>
</env:Envelope>

At runtime, the error reported by the schema validator is set in the message. The following example shows a SOAP Fault containing a typical schema validation error:

<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
  <env:Body>
    <env:Fault>
      <env:Code>
        <env:Value>env:Receiver</env:Value>
        <env:Subcode>
          <env:Value xmlns:fault="http://www.Oracle.com/soapfaults">
            fault:MessageBlocked
          </env:Value>
        </env:Subcode>
      </env:Code>
      <env:Reason>
        <env:Text xml:lang="en">
          [XSD Error: Unknown element 'id' (line: 2, column: 8)]
        </env:Text>
      </env:Reason>
      <env:Detail xmlns:fault="http://www.Oracle.com/soapfaults"
        fault:type="faultDetails">
      </env:Detail>
    </env:Fault>
  </env:Body>>
</env:Envelope>

The following figure shows how to use the Set Message filter to return a customized SOAP Fault in a policy. If the Schema Validation filter succeeds, the message is routed on to the target Web service. However, if the schema validation fails, the Set Message filter (named Set Custom Fault Message) is invoked. The filter sets the contents of the xsd.errors message attribute (the schema validation errors) to the custom SOAP Fault message as shown in the example error. The Reflect filter (named Return SOAP Fault) then writes the message back to the client.