Verify the Adapter Installation (Oracle Solaris x86)

1. Power on the server, and then boot the server.
2. Check the driver version.

   # modinfo|grep i40e
   173 7b762000  17998 100   1  i40e (Intel 10Gb Ethernet 1.0.6)
   

   If the version number is not at least 1.0.6, you must install the latest driver patch.

   For the latest list of supported platforms and operating systems, refer to the Oracle Quad 10Gb Ethernet Adapter Product Notes at:

   http://www.oracle.com/goto/quad-10gb-ethernet-adapter/docs. For Oracle Solaris OS systems, the minimum supported version is required, which is Oracle Solaris 11.2 SRU11.

3. Check to see if the adapter is properly installed and recognized by the OS.

   # grep i40e /etc/path_to_inst
   

   If the adapter is properly installed, you should see output similar to this:

   “/pci@0,0/pci8086,3c0a@3,2/pci108e,7b15@0” 0 “ixgbe”
   “/pci@0,0/pci8086,3c0a@3,2/pci108e,7b15@0,1” 1 “ixgbe”
   

Related Information

• Order Additional Hardware

• Install the Adapter

• Install the QSFP+ Transceivers

• Verify the Adapter Installation (Oracle Solaris x86)

• Verify the Adapter Installation (Linux)

• Verify the Installation (Windows)