Module Status LEDs

Language:

During runtime operation, each module's LEDs indicate real-time status.

Glyph	Name	Color	State and Meaning
	Attention	Amber	Indicates these conditions: On: Module fault and requires attention Off: Module normal operation
	OK	Green	Indicates these conditions: On: Module Powered and operational Blink: Initializing (Hot-plug is not allowed) Off: Module not operational

The module has two status LEDs that indicate real-time status for the module:

Attention (amber exclamation point) lights if the module is determined to be in an incorrect operational state.
OK LED lights steady green when the module is in the correct operational state.

The Attention and OK LEDs do not blink simultaneously. This table shows the other states for the module LEDs.

Attention LED	OK LED	Status
Unlit	Unlit	Module is not receiving power or is inactive.
Unlit	Blinking	Module is in power up state. In this state, the module cannot be hot-plugged. The OK LED does not blink during module power down.
unlit	Lit	Module is powered on and operational.
Lit	Lit	Module is powered and operational, but needs attention.
Lit	Unlit	Module is not in correct operational mode and needs attention.