Go to main content
Oracle® ZFS Storage Appliance Installation Guide

Exit Print View

Updated: July 2017
 
 

Oracle Storage Drive Enclosure DE2-24

This section introduces the front and rear panel components of the DE2-24P and DE2-24C disk shelves.

DE2-24 Disk Shelf

The Oracle Storage Drive Enclosure DE2-24P is a 2U chassis that supports 24 2.5" SAS-2 drives. The high-capacity HDDs provide reliable storage. The SSDs provide accelerated write operations, and for some controllers, read-optimized cache operations. This disk shelf features dual, redundant I/O Modules (IOMs), and dual power supply with fan modules.

Figure 9  DE2-24P Drive Locations (Front View)

image:Graphic showing the DE2-24P drive numbers

Up to four write-optimized log SSDs are supported per disk shelf. Log devices should be populated in order of slots 20, 21, 22, and 23.

Read-optimized cache SSDs can also be installed in the DE2-24P disk shelf, for some controllers. For slot configuration details and minimum software requirements, see Disk Shelf Configurations in Oracle ZFS Storage Appliance Customer Service Manual.

Figure 10  DE2-24P Status Indicators (Front View)

image:Graphic showing the drive enclosure and drive LEDs

Figure Legend
1 System power indicator
2 Module fault indicator
3 Locate indicator
4 Power/Activity indicator
5 Drive fault indicator

Figure 11  DE2-24P Rear Panel

image:Graphic showing DEw-24P drive enclosure rear panel

Figure Legend
1 Power supply with fan module 0
2 I/O Module 1
3 I/O Module 0
4 Power supply with fan module 1

DE2-24C Disk Shelf

The Oracle Storage Drive Enclosure DE2-24C is a 4U chassis that supports 24 3.5" SAS-2 drives. The high-capacity HDDs provide reliable storage. The SSDs provide accelerated write operations, and for some controllers, read-optimized cache operations. This disk shelf features dual, redundant I/O Modules (IOMs), and dual power supply with fan modules.

Figure 12  DE2-24C Drive Locations (Front View)

image:Graphic showing the DE2-24C and Sun Disk Shelf drive                                 numbers

Up to four write-optimized log SSDs are supported per disk shelf. Log devices should be populated in order of slots 20, 21, 22, and 23.

Read-optimized cache SSDs can also be installed in the DE2-24C disk shelf, for some controllers. For slot configuration details and minimum software requirements, see Disk Shelf Configurations in Oracle ZFS Storage Appliance Customer Service Manual.

Figure 13  DE2-24C Status Indicators (Front View)

image:Graphic showing the DE2-24C drive enclosure and drive                                 LEDs

Figure Legend
1 System power indicator
2 Module fault indicator
3 Locate indicator
4 Power/Activity indicator
5 Drive fault indicator

Figure 14  DE2-24C Rear Panel

image:Graphic showing DE2-24C drive enclosure rear panel

Figure Legend
1 Power supply filler panel, slot 0
2 Power supply with fan module 1
3 Power supply with fan module 2
4 Power supply filler panel, slot 3
5 I/O Module filler panel
6 I/O Module 0
7 I/O Module filler panel
8 I/O Module 1

Note -  It is especially important that power supplies and their filler panels are in the correct slots.

Figure 15  DE2 I/O Module Indicators

image:Graphic showing input output module indicators

Figure Legend
1 Fault/Locate indicator
2 Power/OK indicator
3 SAS-2 Port 0
4 SAS-2 Port 1
5 SAS-2 Port 2
6 Host port activity indicators
7 For Oracle service only
8 For Oracle service only

The DE2-24C and DE2-24P disk shelves use the same I/O Module.

Figure 16  DE2 Power Supply Indicators

image:Graphic showing the power supply indicators at the back of the                                 drive enclosure

Figure Legend
1 DC power fail indicator
2 Fan fail indicator
3 AC power fail indicator
4 Power supply status indicator
5 Power on/off switch
6 Universal power input connector
7 Power cord tie wrap

The DE2-24C and DE2-24P disk shelves use the same power supply.