Analytic functions compute an aggregate value based on a group of rows. They differ from aggregate functions in that they return multiple rows for each group. The group of rows is called a window and is defined by the
analytic_clause. For each row, a sliding window of rows is defined. The window determines the range of rows used to perform the calculations for the current row. Window sizes can be based on either a physical number of rows or a logical interval such as time.
Analytic functions are the last set of operations performed in a query except for the final
BY clause. All joins and all
HAVING clauses are completed before the analytic functions are processed. Therefore, analytic functions can appear only in the select list or
Analytic functions are commonly used to compute cumulative, moving, centered, and reporting aggregates.
The semantics of this syntax are discussed in the sections that follow.
Specify the name of an analytic function (see the listing of analytic functions following this discussion of semantics).
Analytic functions take 0 to 3 arguments. The arguments can be any numeric data type or any nonnumeric data type that can be implicitly converted to a numeric data type. Oracle determines the argument with the highest numeric precedence and implicitly converts the remaining arguments to that data type. The return type is also that data type, unless otherwise noted for an individual function.
analytic_clause to indicate that the function operates on a query result set. This clause is computed after the
HAVING clauses. You can specify analytic functions with this clause in the select list or
BY clause. To filter the results of a query based on an analytic function, nest these functions within the parent query, and then filter the results of the nested subquery.
Notes on the analytic_clause:
The following notes apply to the
You cannot nest analytic functions by specifying any analytic function in any part of the
analytic_clause. However, you can specify an analytic function in a subquery and compute another analytic function over it.
You can specify
analytic_clausewith user-defined analytic functions as well as built-in analytic functions. See CREATE FUNCTION.
BYclauses in the
Appendix C in Oracle Database Globalization Support Guide for the collation determination rules for the
) clause of an analytic function
BY clause to partition the query result set into groups based on one or more
value_expr. If you omit this clause, then the function treats all rows of the query result set as a single group.
To use the
query_partition_clause in an analytic function, use the upper branch of the syntax (without parentheses). To use this clause in a model query (in the
model_column_clauses) or a partitioned outer join (in the
outer_join_clause), use the lower branch of the syntax (with parentheses).
You can specify multiple analytic functions in the same query, each with the same or different
If the objects being queried have the parallel attribute, and if you specify an analytic function with the
query_partition_clause, then the function computations are parallelized as well.
Valid values of
value_expr are constants, columns, nonanalytic functions, function expressions, or expressions involving any of these.
order_by_clause to specify how data is ordered within a partition. For all analytic functions you can order the values in a partition on multiple keys, each defined by a
value_expr and each qualified by an ordering sequence.
Within each function, you can specify multiple ordering expressions. Doing so is especially useful when using functions that rank values, because the second expression can resolve ties between identical values for the first expression.
order_by_clause results in identical values for multiple rows, the function behaves as follows:
RANKreturn the same result for each of the rows.
ROW_NUMBERassigns each row a distinct value even if there is a tie based on the
order_by_clause. The value is based on the order in which the row is processed, which may be nondeterministic if the
BYdoes not guarantee a total ordering.
For all other analytic functions, the result depends on the window specification. If you specify a logical window with the
RANGEkeyword, then the function returns the same result for each of the rows. If you specify a physical window with the
ROWSkeyword, then the result is nondeterministic.
Restrictions on the ORDER BY Clause
The following restrictions apply to the
When used in an analytic function, the
order_by_clausemust take an expression (
SIBLINGSkeyword is not valid (it is relevant only in hierarchical queries). Position (
position) and column aliases (
c_alias) are also invalid. Otherwise this
order_by_clauseis the same as that used to order the overall query or subquery.
An analytic function that uses the
RANGEkeyword can use multiple sort keys in its
BYclause if it specifies any of the following windows:
ROW. The short form of this is
Window boundaries other than these four can have only one sort key in the
BYclause of the analytic function. This restriction does not apply to window boundaries specified by the
ASC | DESC
Specify the ordering sequence (ascending or descending).
ASC is the default.
NULLS FIRST | NULLS LAST
Specify whether returned rows containing nulls should appear first or last in the ordering sequence.
LAST is the default for ascending order, and
FIRST is the default for descending order.
Analytic functions always operate on rows in the order specified in the
order_by_clause of the function. However, the
order_by_clause of the function does not guarantee the order of the result. Use the
order_by_clause of the query to guarantee the final result ordering.
Some analytic functions allow the
windowing_clause. In the listing of analytic functions at the end of this section, the functions that allow the
windowing_clause are followed by an asterisk (*).
ROWS | RANGE
These keywords define for each row a window (a physical or logical set of rows) used for calculating the function result. The function is then applied to all the rows in the window. The window moves through the query result set or partition from top to bottom.
ROWSspecifies the window in physical units (rows).
RANGEspecifies the window as a logical offset.
You cannot specify this clause unless you have specified the
order_by_clause. Some window boundaries defined by the
RANGE clause let you specify only one expression in the
order_by_clause. Refer to Restrictions on the ORDER BY Clause.
The value returned by an analytic function with a logical offset is always deterministic. However, the value returned by an analytic function with a physical offset may produce nondeterministic results unless the ordering expression results in a unique ordering. You may have to specify multiple columns in the
order_by_clause to achieve this unique ordering.
BETWEEN ... AND
AND clause to specify a start point and end point for the window. The first expression (before
AND) defines the start point and the second expression (after
AND) defines the end point.
If you omit
BETWEEN and specify only one end point, then Oracle considers it the start point, and the end point defaults to the current row.
PRECEDING to indicate that the window starts at the first row of the partition. This is the start point specification and cannot be used as an end point specification.
FOLLOWING to indicate that the window ends at the last row of the partition. This is the end point specification and cannot be used as a start point specification.
As a start point,
ROW specifies that the window begins at the current row or value (depending on whether you have specified
RANGE, respectively). In this case the end point cannot be
As an end point,
ROW specifies that the window ends at the current row or value (depending on whether you have specified
RANGE, respectively). In this case the start point cannot be
value_expr PRECEDING or value_expr FOLLOWING
FOLLOWINGis the start point, then the end point must be
PRECEDINGis the end point, then the start point must be
If you are defining a logical window defined by an interval of time in numeric format, then you may need to use conversion functions.
If you specified
value_expris a physical offset. It must be a constant or expression and must evaluate to a positive numeric value.
value_expris part of the start point, then it must evaluate to a row before the end point.
If you specified
value_expris a logical offset. It must be a constant or expression that evaluates to a positive numeric value or an interval literal. Refer to Literals for information on interval literals.
You can specify only one expression in the
value_exprevaluates to a numeric value, then the
exprmust be a numeric or
value_exprevaluates to an interval value, then the
exprmust be a
If you omit the
windowing_clause entirely, then the default is
Analytic functions are commonly used in data warehousing environments. In the list of analytic functions that follows, functions followed by an asterisk (*) allow the full syntax, including the
- AVG *
- CORR *
- COUNT *
- COVAR_POP *
- COVAR_SAMP *
- FIRST_VALUE *
- LAST_VALUE *
- MAX *
- MIN *
- NTH_VALUE *
- REGR_ (Linear Regression) Functions *
- STDDEV *
- STDDEV_POP *
- STDDEV_SAMP *
- SUM *
- VAR_POP *
- VAR_SAMP *
- VARIANCE *
Oracle Database Data Warehousing Guide for more information on these functions and for scenarios illustrating their use