Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Displays InfiniBand nodes in topology. Issued on the Linux InfiniBand host.
ibnodes [-h][topology|-C ca_name][-P ca_port][-t timeout]
where:
topology is the topology file.
ca_name is the channel adapter name.
ca_port is the channel adapter port.
timeout is the timeout in milliseconds.
This InfiniBand software command is a script that discovers the InfiniBand fabric topology or uses the existing topology file to extract the InfiniBand nodes of the channel adapters, switches, and routers.
The following table describes the options to the ibnodes command and their purposes:
|
The following example shows how to display the node GUIDs with the ibnodes command.
# ibnodes Ca : 0x0003ba000100c708 ports 2 "nsn34-39 HCA-1" Switch : 0x0021283a83ae11d2 ports 36 "Sun DCS 648 shmm1500 LC slot 1 switch 3" base port 0 lid 35 lmc 0 Switch : 0x0021283a83b112b2 ports 36 "Sun DCS 648 shmm1500 LC slot 2 switch 1" base port 0 lid 17 lmc 0 Switch : 0x0021283a83b112a2 ports 36 "Sun DCS 648 shmm1500 LC slot 2 switch 0" base port 0 lid 4 lmc 0 Switch : 0x0021283a83b112d2 ports 36 "Sun DCS 648 shmm1500 LC slot 2 switch 3" base port 0 lid 36 lmc 0 . . . #
Note - The output in the example is just a portion of the full output and varies for each InfiniBand topology.
ibnodes man page