Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Sets the locked bit. Issued on the CMC.
setlocked IPMB_address FRU_ID 0 | 1
where:
IPMB_address is the IPMB bus address of the component.
FRU_ID is the FRU identifier of the component or portion of the component.
This CLIA command sets the locked bit for the specified FRU to the specified state (0 for unlock or 1 for lock).
The locked bit controls whether the FRU is allowed to autonomously progress from state M1 (inactive) to state M2 (activation request). If the locked bit is set, this transition is not allowed.
This command can be used to reactivate a previously manually deactivated FRU by clearing the locked bit for it.
The following example shows how to clear the locked bit for the IPM controller at IPMB address 92 (line card 8), thus allowing it to reactivate using the setlocked command.
# clia setlocked 92 0 0 Pigeon Point Shelf Manager Command Line Interpreter Lock set successfully to 0x0 #