| Exit Print View | |
Sun Datacenter InfiniBand Switch 648 Topic Set |
|
Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Queries the InfiniBand SMInfo attribute. Issued on the Linux InfiniBand host.
sminfo [-d][-e] -s state -p priority -a activity [-D][-G][-h][-V][-C ca_name][-P ca_port][-t timeout] smlid|smdr_path
where:
state is the state for the Subnet Manager.
priority is the priority.
activity is the activity count.
ca_name is the channel adapter name.
ca_port is the channel adapter port.
timeout is the timeout in milliseconds.
smlid is the Subnet Manager local identifier.
smdr_path is the directed path for the Subnet Manager.
This InfiniBand software command conducts a query of the Subnet Manager and outputs the information in a human readable format. The target Subnet Manager is identified in the local port information, or it is specified by the smlid or smdr_path.
Note - Using the sminfo command for other than simple queries might fault the target Subnet Manager.
The following table describes the options to the sminfo command and their purposes:
|
The following example shows how to display the SMInfo with the sminfo command.
# sminfo sminfo: sm lid 58 sm guid 0x3ba000100c70a, activity count 46133 priority 0 state 3 SMINFO_MASTER #
sminfo man page
|
