Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
Deactivates a card. Issued on the CMC.
deactivate lc|fc slot
where slot is the number of the line card (0–8) or fabric card (0–8).
This switch-specific command brings a line card or fabric card from a fully powered on state to a standby state. In the standby state, the IPMB bus is still active. You must deactivate a line card or fabric card if you want to run the checkpowers command for that component.
The following example shows how to activate line card 8 with the deactivate command.
# deactivate lc 8 Deactivating LC 8 Pigeon Point Shelf Manager Command Line Interpreter Command issued via IPMB, status = 0 (0x0) Command executed successfully #