Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Queries the InfiniBand fabric for data counters. Issued on the Linux InfiniBand host.
ibdatacounters [-b][-h][-N][-v][topology|-C ca_name][-P ca_port][-t timeout]
where:
topology is the topology file.
ca_name is the channel adapter name.
ca_port is the channel adapter port.
timeout is the timeout in milliseconds.
This InfiniBand software command is a script that uses the topology file created by the ibnetdiscover command. The script scans the InfiniBand fabric to validate the connectivity and reports the values of the data counters.
The following table describes the options to the ibdatacounters command and their purposes:
|
The following example shows how to display the data counters for all ports with the ibdatacounters command.
# ibdatacounters Error check on lid 85 (Sun DCS 648 shmm1500 LC slot 6 switch 1) port all: FAILED # Port counters: Lid 85 port 1 XmtData:.........................360 RcvData:.........................360 XmtPkts:.........................5 RcvPkts:.........................5 # Port counters: Lid 85 port 2 . . . RcvPkts:.........................147 ## Summary: 55 nodes checked, 0 bad nodes found ## 1296 ports checked #
Note - The output in the example is just a portion of the full output.
ibdatacounters man page