Note - This is a cold service procedure that must be performed by qualified service personnel. See Cold Service, Replaceable by Authorized Service Personnel for more information about this category of service procedures.
Caution - The server must be fully shut down and the power cords disconnected.
Caution - This procedure involves handling circuit boards that are extremely sensitive to static electricity. Ensure that you follow ESD preventative practices to avoid damaging the circuit boards.
Caution - Components inside the chassis might be hot. Use caution when servicing components inside the chassis.
This is shown in the following figure.
Figure 51 Installing a Hard Drive Cage
Caution - The data cables are delicate. Use great care when sliding the disk cage in or out of the chassis that it does not rub against the cables.
Caution - Use care when installing the hard drive cage. Be certain that the hard drive cage is aligned with the base of the chassis before sliding the cage back.
Refer to the note you made when disconnecting the data cables to verify the correct mating of cables to connectors.
Two screws secure the disk cage to each side of the chassis.
Note - As soon as the power cords are connected, standby power is applied. Depending on how the firmware is configured, the system might boot at this time.