| Sun Ultra 40 Workstation Service Manual |     |
Sun Ultra 40 Workstation Service Manual
ForUltra 40 and Ultra 40 M2
820-0123-13
|
Contents |
1. Introduction to the Sun Ultra 40 Workstation
1.2 Operating System and Software
1.2.1 Preinstalled Operating System and Software
1.2.2 Supported Operating Systems
1.2.3 Tools and Drivers CD Software
1.3.1 Finding the System Serial Number
1.3.3 Ultra 40 Internal Components
1.3.4 Ultra 40 M2 Internal Components
1.4 Powering the Workstation On and Off
1.4.1 Powering On the Workstation
1.4.2 Powering Off the Workstation
2.1.1 Performing an External Visual Inspection
2.1.2 Performing an Internal Visual Inspection
2.2 Troubleshooting Procedures
2.3 Ultra 40 and Ultra 40 M2 Workstation POST Codes
3. Performing Diagnostic Tests
3.1 PC-Check Diagnostics Overview
3.4.1 Performing Immediate Burn-In Testing
3.4.2 Performing Deferred Burn-In Testing
3.5.1 Removing Existing Partitions From a Hard Disk
3.5.2 Adding a Diagnostic Partition to the First Bootable Disk
3.6 Accessing the Diagnostic Partition
3.6.1 Accessing the Diagnostic Partition Under DOS
3.6.2 Accessing the Diagnostic Partition Under the Solaris 10 Operating System
3.6.3 Accessing the Diagnostic Partition Under Red Hat Linux
3.6.4 Accessing the Diagnostic Partition Under Windows XP
4. Preparing to Replace Components
4.1.3 Electrostatic Discharge Safety
4.3 Preparing the Workstation for Servicing
4.4 Finding Your Replacement Procedures
5. Replacing the Motherboard and Associated Components
5.2.1 DIMM Configuration Rules
5.5 Replacing the Motherboard Tray Assembly
5.5.1 Identifying the Motherboard Tray Assembly
5.5.2 Removing the Motherboard Tray Assembly
5.5.3 Installing the Motherboard Tray Assembly
5.6 Replacing a CPU and Heatsink/Fan Assembly
5.6.1 Removing a CPU from an Ultra 40
5.6.2 Replacing a CPU in an Ultra 40
5.6.3 Removing a CPU from an Ultra 40 M2
5.6.4 Replacing a CPU in an Ultra 40 M2
6.2 Replacing the Hard Drive Backplane and Signal Cable
6.2.1 Removing the Hard Drive Backplane and Signal Cable
6.2.2 Installing the Hard Drive Backplane and Signal Cable
6.3 Replacing the DVD Dual Drive and I/O Module
6.4 Installing SAS Card, Cables, and Hard Drives
6.5 Replacing the Optional SAS Card
7. Replacing Chassis Components
7.1 Replacing the Fan Tray and Fan Tray Backplane
7.1.2 Removing and Replacing the Fan Tray Backplane
7.2 Removing and Replacing the Power Supply
7.2.1 Removing the Power Supply
7.2.2 Installing the Power Supply
8. Finishing Component Replacement
8.1 Reassembling the Workstation
A.4 Environmental Requirements
A.5 Shock and Vibration Specifications
| Sun Ultra 40 Workstation Service Manual | 820-0123-13 | |
Copyright © 2008, Sun Microsystems, Inc. All Rights Reserved.