JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Fire X4800 Server Diagnostics Guide     Sun Fire X4800 Server Documentation
search filter icon
search icon

Document Information

Using This Documentation

Product Information Web Site

Documentation and Feedback

About This Documentation (PDF and HTML)

Contributors

Change History

Overview of the Diagnostics Guide

Introduction to System Diagnostics

Troubleshooting Options

Diagnostic Tools

Troubleshooting the Server

How to Gather Service Visit Information

How to Troubleshoot Power Problems

How to Externally Inspect the Server

How to Internally Inspect the Server

Troubleshooting DIMM Problems

DIMM Fault LEDs

Identifying DIMM Error Messages

Correcting DIMM Errors

BIOS POST

Default BIOS Power-On Self-Test (POST) Events

BIOS POST Errors

Using the ILOM to Monitor the Host

Viewing the ILOM Sensor Readings

Viewing Fault Status

Clearing Faults

Viewing the ILOM System Event Log

Clearing the System Event Log

Interpreting Event Log Time Stamps

Resetting the SP

Creating a Data Collector Snapshot

How to Create a Snapshot With the ILOM Web Interface

How to Create a Snapshot With the ILOM Command-Line Interface

Using SunVTS Diagnostics Software

Introduction to SunVTS Diagnostic Test Suite

SunVTS Documentation

How to Diagnose Server Problems With the Bootable Diagnostics CD

Performing Pc-Check Diagnostic Tests

Pc-Check Diagnostics Overview

How to Run Pc-Check Diagnostics

Pc-Check Main Menu

System Information Menu

Advanced Diagnostics

Burn-In Testing

Viewing the Pc-Check Results

Index

Advanced Diagnostics

Advanced Diagnostics are used to test an individual device on the system. Most of the selections on this menu display information about the corresponding devices, and then offer a menu of testing options. For example, to test CPU 0, you can select Advanced Diagnostics Tests, and then select Processor, and then select CPU0.


Note - If you do not know which device to test, see Burn-In Testing.


The following table gives the name and a brief description of many of the selections in the Advanced Diagnostics Tests menu.


Note - Some of the tests in the table might not be applicable for your server.


Table 2 Advanced Diagnostics Test Menu Options

Option
Description
Processor
Displays information about the processors and includes a Processor Tests menu.
Memory
Displays information about the memory, and includes tests for the different types of system memory.
Motherboard
Displays information about the motherboard, and includes a Motherboard Tests menu.
Floppy Disks
Not applicable.
Hard Disks
Displays information about the hard disk, and includes a Hard Disk Tests menu.
CD-ROM/DVD
Not applicable.
ATAPI Devices
Not applicable.
TPM
Not applicable.
Serial Ports
Displays information about the serial ports and includes a Serial Port tests menu.
Parallel Ports
Not applicable.
ATA
Includes an ATA test menu. Select the serial ATA driver to test.
USB
Displays information about the USB devices on the system and includes a USB Tests menu.
Firewire
Not applicable.
SCSI
Displays information about SCSI devices and includes a SCSI tests menu.
Network
Performs network register controller tests.
System Stress Test
Exercises and checks the CPU, memory, and hard drive.
Keyboard
Includes a Keyboard Test menu with options for performing different tests on the keyboard.
Mouse
Displays information about the mouse and includes a menu to test the mouse on the system.
Audio
Not applicable.
Video
Displays information about the video card. Initially, the monitor might flicker, but then the system brings up a Video Test Options menu that enables you to perform various video tests.
Firmware– ACPI
Displays information about Advanced Configurable Power Interface (ACPI) and includes an ACPI Tests menu.