JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
StorageTek 8 Gb FC PCIe HBA From QLogic Installation Guide

For HBA Models SG-XPCIE1FC-QF8-Z, SG-PCIE1FC-QF8-Z, SG-XPCIE1FC-QF8-N, SG-PCIE1FC-QF8-N and SG-XPCIE2-QF8-Z, SG-PCIE2FC-QF8-Z, SG-XPCIE2-QF8-N, SG-PCIE2FC-QF8-N, 7106958, 7106957

Oracle Technology Network
Library
PDF
Print View
Feedback
search filter icon
search icon

Document Information

Using This Documentation

Chapter 1 HBA Overview

Chapter 2 Hardware Installation and Removal

Observing ESD and Handling Precautions

Installing the Hardware

To Install the HBA

To Connect the Optical Cable

To Apply Power

Testing the Installation

To Verify Proper Installation (Oracle SPARC)

To Verify Attached Storage (Oracle SPARC)

To Verify Proper Installation (Oracle x86)

Replacing the SFP+ Unit on the HBA

Removing the Hardware

To Remove the HBA

Chapter 3 Software Installation

Chapter 4 Known Issues

To Verify Proper Installation (Oracle x86)

  1. During system power-on initiation, the following system booting BIOS initialization screen is displayed.
    QLogic Corporation
    QLE2562 PCI Fibre Channel ROM BIOS version 2.02
    Copyright (c) QLogic Corporation 1992-2008. All rights reserved.
    www.qlogic.com
     
    Press <Ctrl-Q> or <Alt-Q> for Fast!UTIL 
    BIOS for Adapter 0 is disabled
    BIOS for Adapter 1 is disabled
    ROM BIOS NOT INSTALLED
    
  2. Immediately press Control-Q.

    The following QLogic Fast!UTIL menu is displayed.

    QLogic Corporation
    QLE2562 PCI Fibre Channel ROM BIOS version 2.02
    Copyright (c) QLogic Corporation 1993-2008. All rights reserved.
    www.qlogic.com
     
    Press <Ctrl-Q> or <Alt-Q> for Fast!UTIL 
    BIOS for Adapter 0 is disabled
     
    BIOS for Adapter 1 is disabled
     
    ROM BIOS NOT INSTALLED
     
    <CTRL-Q> Detected, Initialization in progress, Please wait...
    

    Then the following QLogic Fast!UTIL menu is displayed.

                        QLogic Fast!UTIL
                       Select Host Adapter
     
    ----------------------------------------------------------
    Adapter Type   I/O Address   Slot   Bus   Device   Function
     
    QLE2562               9400     01    02       01         1
    QLE2562               9800     01    02       01         0
    
  3. Use the Arrow key to highlight the HBA port that has connected devices and press Enter.

    The following QLogic Fast!UTIL menu is displayed.

                       QLogic Fast!UTIL
                       Selected  Adapter
    ----------------------------------------------------------
    Adapter Type   I/O Address   Slot   Bus   Device   Function
     
     QLE2562              9400     01    02       01          1
     
    ----------------------------------------------------------
       Fast!UTIL Options
     
       Configuration Settings
       Scan Fibre Devices
       Fibre Disk Utility
       Loopback Data Test
       Select Host Adapter
       Exit Fast!UTIL
    
  4. Use the Arrow key to highlight Scan Fibre Devices and press Enter.

    In the example that follows, a storage JBOD has six targets attached to one port of a dual port HBA.

    The following QLogic Fast!UTIL menu is displayed.

                          QLogic Fast!UTIL
     
    Scan Fibre Channel Loop
     
    ID  Vendor  Product           Rev    Port Name        Port ID
     
    0   SEAGATE ST336752FSUN36G   0205   21000004CF64C8E0 0000CC
    1   SEAGATE ST336752FSUN36G   0205   21000004CF6493D0 0000CB
    2   SEAGATE ST336752FSUN36G   0205   21000004CF6428C4 0000CA
    3   SEAGATE ST336752FSUN36G   0205   21000004CF64C5B2 0000C9
    4   SEAGATE ST336752FSUN36G   0205   21000004CF6096F0 0000C7
    5   SEAGATE ST336752FSUN36G   0205   21000004CF648010 0000C6
    6   SUN     StorEdge 3510F    D1046  215000C0FF00225B 0000CD
    7   No device present
    8   No device present
    9   No device present
    10  No device present
    11  No device present
    12  No device present
    13  No device present
    14  No device present
    15  No device present
    
  5. To exit the QLogic Fast!UTIL, press the Escape key, highlight Exit Fast!UTIL, and press Enter.

    The following QLogic Fast!UTIL menu is displayed.

                       QLogic Fast!UTIL
                       Selected  Adapter
     
    ----------------------------------------------------------
    Adapter Type   I/O Address   Slot   Bus   Device   Function
     
    QLE2562               9400     01    02       01         1
     
    ----------------------------------------------------------
    Fast!UTIL Options
     
    Configuration Settings
    Scan Fibre Devices
    Fibre Disk Utility
    Loopback Data Test
    Select Host Adapter
    Exit Fast!UTIL
    

    The following QLogic Fast!UTIL menu is displayed.

                       QLogic Fast!UTIL
     
    Exit Fast!UTIL
    ----------------------------------
     
    Reboot System
    Return to Fast!UTIL