Confirming Switch Specifications
Preparing to Install the Switch
Install the Switch in the Rack
Finish the Switch Installation
Connecting to the Service Processor
Oracle ILOM Features Not Supported
Verify the DHCP-Assigned IP Address and Host Name
Configure Network Management From CLI (SER MGT)
Log Into Oracle ILOM Web (NET MGT)
Log Into Oracle ILOM CLI (NET MGT)
Log Into Oracle ILOM CLI (SER MGT)
SER MGT Port Configuration Parameters
Configure Network Management From Web
Configure Network Management From CLI (NET MGT)
Configuring SEFOS User Privileges
Change a SEFOS User Privilege Level
Check Switch Status (Oracle ILOM)
The SFP+ connectors support the following types of cables:
10 Gbyte/1 Gbyte dual speed fiber
1 Gbyte RJ-45 copper
10 Gbps direct attach copper
The active fiber SFP+ Ethernet cable is a dual-part unit, where the cable and the optical tranceiver are separate parts.
The SFP+ Ethernet cables are single-part (cable and transceiver combined) and dual-part (cable and transceiver separate) units.
The active fiber SFP+ Ethernet cable is a dual-part unit, where the cable and the optical tranceiver are separate parts.
The passive copper Ethernet cable is a single-part unit, where the cable and the tranceiver (cable connector) are a single combined assembly.