Rack Compatibility
The rackmount kit is compatible with equipment racks that
meet the following standards.
|
|
Rack types when used with the CMA comb,
part number 7069793 |
1000-mm and 1200-mm racks |
Rack type when used with the multi-piece
CMA, part number 7041990 |
1200-mm rack only. |
Structure |
Four-post rack (mounting at both front
and rear). Two-post racks are not compatible. |
Rack horizontal opening and unit vertical
pitch |
Conforms to ANSI/EIA 310-D-1992 or IEC
60927 standards. |
Rack rail mounting hole sizes |
9.5-mm square holes, M6 round mounting
holes and 10-32 mounting holes are supported. All other sizes, including
7.2-mm or M5 mounting holes, are not supported. |
Distance between front and rear mounting
planes |
Minimum: 24 in. (240 mm)
Maximum: 36 in. (915 m) |
Clearance depth in front of front mounting
plane |
Distance to front rack door is at least 1
in.
(25.4 mm). |
Clearance depth behind front mounting
plane |
Distance to rear rack door is at least 34.6
in. (878.8 mm) with the cable management arm, or 31.5 in. (800 mm)
without the cable management arm. |
Clearance width between front and rear
mounting planes |
Distance between structural supports
and cable troughs is at least 18.9 in. (480 mm). |
Server dimensions |
Depth: 31.5in. (800 mm)
Width: 17.5 in. (445 mm)
Height: 8.5 in. (215 mm) |
|