Chapter 1 Oracle ZFS Storage Appliance Overview
Chapter 3 Initial Configuration
Chapter 4 Network Configuration
Network IP MultiPathing (IPMP)
Network Performance and Availability
Network Configuration Using the BUI
Network Configuration Using the CLI
Network Configuration Tasks Using the BUI
Creating a single port interface
Creating a single port interface, drag-and-drop
Creating an LACP aggregated link interface
Creating an IPMP group using probe-based and link-state failure detection
Creating an IPMP group using link-state only failure detection
Creating an InfiniBand partition datalink and interface
Creating a VNIC without a VLAN ID for clustered controllers
Creating VNICs with the same VLAN ID for clustered controllers
Network Configuration Tasks Using the CLI
Changing the multihoming property to strict
Chapter 5 Storage Configuration
Chapter 6 Storage Area Network Configuration
Chapter 8 Setting ZFSSA Preferences
Chapter 10 Cluster Configuration
Chapter 12 Shares, Projects, and Schema
This page provides configuration of the IP routing table and associated properties, as discussed above. By default, all entries in the routing table are shown, but the table can be filtered by type by using the subnavigation bar.
To check a specific route, in the CLI use traceroute.
zfssa-source:> traceroute 10.80.198.102 traceroute: Warning: Multiple interfaces found; using 10.80.198.101 @ igb3 traceroute to 10.80.198.102 (10.80.198.102), 30 hops max, 40 byte packets 1 10.80.198.1 (10.80.198.1) 6.490 ms 0.924 ms 0.834 ms 2 10.80.198.102 (10.80.198.102) 0.152 ms 0.118 ms 0.099 ms zfssa-target:> traceroute 10.80.198.101 traceroute: Warning: Multiple interfaces found; using 10.80.198.102 @ igb3 traceroute to 10.80.198.101 (10.80.198.101), 30 hops max, 40 byte packets 1 10.80.198.1 (10.80.198.1) 1.031 ms 0.905 ms 0.769 ms 2 10.80.198.101 (10.80.198.101) 0.158 ms 0.111 ms 0.109 ms