Install the Fan Assembly Door
The procedures in this section should be used for systems configured with twelve
3.5-inch storage drives.
Place the fan assembly door on the chassis and slightly over the fan
Slide the fan assembly door forward and under the lip of the forward top cover until it latches into place .
Use a No. 2 Phillips screwdriver to install and secure the fan assembly door
If your system is configured with twelve 3.5-inch storage drives, install
and tighten the two screws on each side of the chassis and the three screws on
top of the chassis.
If your system is configured with twenty-four 2.5-inch storage drives,
install and tighten the two screws on each side of the chassis.