Go to main content

Managing SAN Devices and Multipathing in Oracle^® Solaris 11.3

Exit Print View

» ...Documentation Home » Oracle Solaris 11.3 Information Library » Managing SAN Devices and Multipathing in ... » Troubleshooting Multipathing-Related Problems » How to Recover Boot Failure in Single User Mode

Updated: March 2018

Managing SAN Devices and Multipathing in Oracle^® Solaris 11.3

Document Information

Using This Documentation

Chapter 1 About Oracle Solaris Storage Stack

Chapter 2 About Oracle Solaris I/O Multipathing

Chapter 3 Configuring Oracle Solaris I/O Multipathing Features

Chapter 4 Configuring Fibre Channel Devices

Chapter 5 Configuring an Oracle Solaris iSCSI Initiator

Chapter 6 Configuring SAS Devices

Chapter 7 Persistent Binding for Tape Devices

Appendix A Manual Configuration for Fabric-Connected Devices

Appendix B Troubleshooting Multipathing-Related Problems

System Fails to Boot or Crashes During stmsboot

How to Recover Boot Failure in Single User Mode

How to Recover from a System Crash

Appendix C Tuning Disk Target Driver Properties

Appendix D Supported HBAs in FC or FCoE Mode

Appendix E Commonly Used I/O Multipathing and Storage Device Administration Commands

SAN and Multipathing Glossary

Language:

How to Recover Boot Failure in Single User Mode

Type the root password and enter single user mode.
Restart the mpxio-upgrade service.
```
# svcadm restart svc:/system/device/mpxio-upgrade:default
```
If this command is not successful, follow the instructions in the next section to recover your original configuration.

Copyright © 2009, 2018, Oracle and/or its affiliates. All rights reserved.