Configure MLDS Query Interval

The MLDS query interval is the period of time the switch waits after sending a group-specific query to determine if hosts are still interested in a specific multicast group. You can configure the group-specific query interval for a given VLAN.

In this example, VLAN 4 is the VLAN for which the for which the query interval is configured, and the query interval is set to 65 seconds.

1. Configure the MLDS query interval.

   SEFOS# configure terminal
   SEFOS(config)# vlan 4
   SEFOS(config-vlan)# ipv6 mld snooping query-interval 65
   

2. View the configuration.

   SEFOS# show ipv6 mld snooping
    
   Snooping VLAN Configuration for the VLAN 4
     MLD Snooping enabled
     MLD Operating version is V1
     Fast leave is disabled
     Snooping switch is configured as Querier
     Snooping switch is acting as Querier
     Query interval is 65 seconds