This section describes some advanced topics related to using Fibre Channel SR-IOV virtual functions.
The ldg2 console log shows the operations of the assigned Fibre Channel virtual function device. Use the fcadm command to view and access the Fibre Channel virtual function device.
ldg2# fcadm hba-port HBA Port WWN: 100000144ffb8a99 Port Mode: Initiator Port ID: 13d02 OS Device Name: /dev/cfg/c3 Manufacturer: Emulex Model: 7101684 Firmware Version: 7101684 1.1.60.1 FCode/BIOS Version: Boot:1.1.60.1 Fcode:4.03a4 Serial Number: 4925382+133400002R Driver Name: emlxs Driver Version: 2.90.15.0 (2014.01.22.14.50) Type: N-port State: online Supported Speeds: 4Gb 8Gb 16Gb Current Speed: 16Gb Node WWN: 200000144ffb8a99 NPIV Not Supported
Use the format command to show the visible LUNs.
ldg2# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c2d0 <Unknown-Unknown-0001-25.00GB> /virtual-devices@100/channel-devices@200/disk@0 1. c3t21000024FF4C4BF8d0 <SUN-COMSTAR-1.0-10.00GB> /pci@340/pci@1/pci@0/pci@6/SUNW,emlxs@0,2/fp@0,0/ssd@w21000024ff4c4bf8,0 Specify disk (enter its number): ^D ldg2#