Go to main content

Oracle^® Server Management Agent for Oracle Solaris 11.3 User's Guide

Exit Print View

» ...Documentation Home » Oracle Hardware Management Pack for Oracle ... » Oracle^® Server Management Agent ... » Working With the Hardware Management Agent » sunHwMonIndicatorLocator » How to Set the Indicator Locator

Updated: October 2017

Oracle^® Server Management Agent for Oracle Solaris 11.3 User's Guide

Document Information

Using This Documentation

Oracle Hardware Management Agent Overview

Hardware Monitoring Using the Server Management Agent

Configuring the Hardware Management Agent and Hardware SNMP Plugins

Oracle Server Hardware SNMP Plugins Overview

Working With the Hardware Management Agent

Retrieving and Setting Information Through SNMP

sunHwMonProductGroup

How to Retrieve the Product Information from an Oracle x86 Server

How to Retrieve The Product Information on an Oracle x86 Server Module

sunHwMonProductChassisGroup

How to Retrieve the Server Module's Product Chassis Information

sunHwMonSPGroup

How to Retrieve Service Processor Information

sunHwMonInventoryTable

How to Retrieve Inventory Information

sunHwMonSensorGroup

How to Retrieve the Sensor Group Information

sunHwMonIndicatorLocator

How to Set the Indicator Locator

Generating SNMP Traps

How to Inject a Simulated Fault

Configuring Oracle ILOM SNMP Trap Forwarding Using itpconfig

Using Oracle Hardware Management Pack to Monitor Disk Diagnostic Events

Troubleshooting the Hardware Management Agent

Language:

How to Set the Indicator Locator

At the command prompt, type the following:
# snmpset -v 2c -c public -m ALL localhost SUN-HW-MONITORING-MIB::sunHwMonIndicatorLocatorCurrentStatus.0 i 7
You should see output similar to the following:
SUN-HW-MONITORING-MIB::sunHwMonIndicatorLocatorCurrentStatus.0 = INTEGER: fastBlinking(7)

Copyright © 2014, 2017, Oracle and/or its affiliates. All rights reserved.