itpconfig Command Usage
The itpconfig commands must be run in administrator mode. The default
installed location for itpconfig is in:
/usr/sbin/
The command syntax for itpconfig is:
itpconfig <subcommand> <type> [options]
When a command fails, it returns one of several failure codes listed
in Error Codes.
Subcommands
The available itpconfig subcommands are:
|
|
list
|
Show Oracle ILOM trap proxy or Host-to-ILOM Interconnect settings.
|
modify
|
Modify Oracle ILOM trap proxy settings.
|
enable
|
Enable trap forwarding or Host-to-ILOM Interconnect.
|
disable
|
Disable trap forwarding or Host-to-ILOM Interconnect.
|
|
See also CLI Tools Command Syntax and Conventions in Oracle Server CLI Tools for Oracle Solaris 11.3 User’s Guide.
Supported Types
|
|
interconnect
|
Modify Host-to-ILOM interconnect settings.
Mandatory options for enable or modify include:
--ipaddress=ipaddress ILOM interconnect IP address
--hostipaddress=ipaddress Host interconnect IP address
--netmask=netmask Host-to-ILOM interconnect netmask
|
trapforwarding
|
Modify ILOM to send SNMP traps for all faults.
Mandatory options for enable or modify include:
--ipaddress=ipaddressIP Address to forward fault traps to
--port=port Port number to forward fault traps to
--community=communitySNMP V2c community to use when forwarding
fault traps
|
|
Options
The following options are available to all CLI Tools commands including itpconfig:
| | |
–?, –h
| –-help
| Displays help information.
|
–V
| –-version
| Displays the tool version.
|
–q
| –-quiet
| Suppresses informational message output and returns only error codes.
|
–y
|
–-yes
|
Execute command without prompting for confirmation.
|
|
Error Codes
itpconfig generates error codes in a similar way to the Oracle Server CLI Tools. See CLI Tools Error Codes in Oracle Server CLI Tools for Oracle Solaris 11.3 User’s Guide.
In addition, itpconfig generates the following error
codes:
|
|
81
|
Oracle ILOM SNMP timeout.
|
82
|
Oracle ILOM SNMP failure.
|
83
|
Service Processor has conflicting configuration.
|
|
These errors can occur if there are issues communicating with the Oracle
ILOM SNMP service when enabling the trap proxy.