Go to main content

Oracle® Server Management Agent for Oracle Solaris 11.3 User's Guide

Exit Print View

Updated: October 2017

itpconfig and the Oracle ILOM Trap Proxy

The itpconfig command line tool allows you to configure a trap forwarding proxy to forward Oracle ILOM generated SNMP traps to the host or a configured SNMP trap destination over the Host-to-ILOM Interconnect. This allows SNMP traps to be forwarded to a destination you specify without having to have a network connection to the server's NET MGT port.

Note -  The Hardware Management Agent supports a trap-triggered polling feature that will only work with host-based SNMP monitoring in conjunction with the Oracle LOM trap proxy. For more information about this feature, see Hardware Management Agent Configuration File.

The itpconfig command can be used to both set up a trap proxy and to configure the Host-to-ILOM Interconnect between the Oracle ILOM service processor and the host.

Refer to your server documentation to see if your server supports the Host-to-ILOM Interconnect.

For information on setting up the Oracle ILOM trap proxy, see Configuring Oracle ILOM SNMP Trap Forwarding Using itpconfig.