Connect Ethernet Network Cables
The server has four 10 Gigabit Ethernet network connectors, marked NET 0, NET 1, NET 2, and
NET 3. Use these ports to connect the server to the network. The Ethernet
interfaces operate at 100 Mbps, 1000 Mbps, and 10000 Mbps. See, Connect Ethernet Network Cables.
Note -
To achieve 10GbE network speeds, use Category 6A (or better) cables and
network devices that support 10000BASE-T networks.
- Connect a Category 5 (or better) cable from your network switch or hub
to Ethernet Port 0 (NET 0) on the rear of the chassis.
- Connect Category 5 (or better) cables from your network switch or hub to the remaining
Ethernet ports (NET 1, NET 2, and NET 3), as needed.