Go to main content

SPARC S7-2L Server Installation Guide

Exit Print View

Updated: June 2017
 
 

Server Overview

This topic provides a high-level introduction to the main components and capabilities of the server.

image:Figure showing the SPARC S7-2L server.
Component
Description
Chassis
Rack-mountable server.
CPU
Two processors installed on the motherboard assembly.
Memory
Sixteen DDR4 DIMMs connect to the motherboard. A server with 16 64-GB DIMMs supports 1024 GB of system memory.
I/O expansion
Seven PCIe Gen3 slots. Six slots are in the rear and one for drive support is internal. All slots support x8 PCIe cards.
Storage devices
For internal storage, the server provides several configurations, depending on the type of drive backplane:
  • Eight 2.5-inch SAS drives. Four slots can use 2.5-inch NVMe drives.

  • Twelve 3.5-inch SAS drives, plus two 2.5-inch SAS drives in the rear, above the power supplies.

  • Twenty four 2.5-inch SAS drives, plus two 2.5-inch drives in the rear, above the power supplies.

  • Twelve 2.5-inch NVMe drives.

USB ports
Two external USB 2.0 ports (front panel).
Ethernet ports
Four 10GbE 100/1000/10000 Mbps, RJ-45-based ports on the rear panel.
Power supplies
Two hot-swappable (1+1) AC 1100W power supplies.
Cooling fans
Four hot-swappable, redundant fan modules at chassis front (top-loading). Redundant fans in each power supply.
SP
Built into motherboard. Includes Oracle Integrated Lights Out Manager (Oracle ILOM).

Related Information