Go to main content
Index
A
- accessing the server
Accessing the Server
- auto-boot? parameter
- Enable or Disable Automatic
Booting (Oracle Solaris)
- Enable or Disable Automatic
Booting (OpenBoot)
B
- boot mode
- expiration dateDisplay the Host Boot Mode Expiration
Date (Oracle ILOM)
- managing at resetChange the Host Boot Mode Behavior at
Reset (Oracle ILOM)
- managing configurationConfigure the Host Boot Mode
(Oracle VM Server for SPARC)
- managing scriptManage the Host Boot Mode Script (Oracle
ILOM)
- managing serverConfiguring Boot and Restart Behavior
- Oracle VM Server for SPARCConfigure the Host Boot Mode
(Oracle VM Server for SPARC)
- overviewBoot Mode
Overview (Oracle ILOM)
- booting
- automatic booting
- Enable or Disable Automatic
Booting (Oracle Solaris)
- Enable or Disable Automatic
Booting (OpenBoot)
- boot parametersConfiguring
Boot Parameters
- boot sequenceBoot Sequence
- changing boot deviceChange the Default Boot Device
(OpenBoot)
- configuringConfiguring
Boot Parameters
- from OpenBoot promptBoot the OS Manually (OpenBoot)
- from Oracle ILOMBoot the OS (Oracle ILOM)
- how to boot and shut downBooting and Shutting Down the OS
C
- components, displaying namesDisplay Server Components (Oracle ILOM)
- cooldown mode, policy settingSpecify Cooldown Mode
D
- devalias commandLocate Device Paths (OpenBoot)
- device namesMatching Devices to Device Names
- device pathsLocate Device Paths (OpenBoot)
- DHCP server, displaying IP addressDisplay the SP Network Parameters
- domains, multiple active
- Power Off a Server With Multiple
Active Domains (Oracle VM Server for SPARC)
- Power On a Server With Multiple
Active Domains (Oracle VM Server for SPARC)
- drive managementManaging Server Drives
E
- ejecting mediaOpenBoot Prompt
F
- fault detectionMonitoring the Server
- firmware
- displaying versionDisplay the Firmware Versions
- updating
- Update the Firmware
- Updating the Firmware
- fwupdate commandDisplay the Firmware Versions
H
- hardware RAIDHardware RAID Support
- host network addressConfiguring SP and Host Network Addresses
- host power state at restart
- restoringRestore the Host Power State
at Restart
- specifying in policy settingSpecify the Host Power State
at Restart
- host power-on delay, policy settingDisable or Reenable the Host Power-On
Delay
I
- ID, changingChanging Server Identification Information
- in-band connection
- Configure SP In-band (Sideband) Access
- Oracle ILOM
In-band (Sideband) Management
- Connecting
to the SP (In-band)
K
- keyswitch, specifying host behaviorSpecify Host Virtual Keyswitch Behavior
- KVMOracle ILOM Remote System VNC Console
L
- Live Firmware updateUpdate the Firmware
- Locator LED
- Display the Locator LED State
of the Server
- Turn Off the Locator LED
- Turn On the Locator LED
- log files, for monitoring the serverMonitoring the Server
M
- MAC address, hostDisplay the Host MAC Address
- monitoring the serverMonitoring the Server
- multipathing softwareMultipathing
Software Overview
N
- network access to SPDisable or Reenable Network
Access to the SP
- network address
- SP Network Address Options
- Configuring SP and Host Network Addresses
- NVMe devicesManaging NVMe Devices
- nvmeadm commandManaging NVMe Devices
O
- OpenBoot
- auto-boot? parameter
- Enable or Disable Automatic
Booting (Oracle Solaris)
- Enable or Disable Automatic
Booting (OpenBoot)
- devalias commandLocate Device Paths (OpenBoot)
- displaying versionDisplay the Firmware Versions
- overviewOpenBoot Overview
- parameters
- OpenBoot
Configuration Parameters
- View All OpenBoot Parameters
- printenv commandprintenv Output
- probe-scsi-all command
- Correlate WWN Device Names With Physical
Locations (probe-scsi-all Command)
- probe-scsi-all Device
Naming (OpenBoot)
- prompt
- Obtain the OpenBoot Prompt (Oracle
ILOM Web Interface)
- Obtain the OpenBoot Prompt (Oracle
ILOM CLI)
- Obtain the OpenBoot Prompt (Oracle
Solaris)
- OpenBoot Prompt
- Obtaining
the OpenBoot Prompt
- Obtain the OpenBoot Prompt Under Various Conditions
- reset overrideOverride OpenBoot Settings to
Reset the Server
- usesOpenBoot Prompt
- Oracle Auto Service RequestOracle Auto Service Request Software Overview
- Oracle Enterprise Manager Ops CenterOracle Enterprise Manager Ops Center Overview
- Oracle Hardware Management PackOracle Hardware Management Pack Overview
- Oracle ILOM
- accessingDisplay the Oracle ILOM Prompt
- accessing the system consoleLog In to the System Console
- configuring restart behaviorServer Restart
Behavior Configuration (Oracle ILOM)
- default username and passwordLog In to Oracle ILOM
- displaying componentsDisplay Server Components (Oracle ILOM)
- logging in toLog In to Oracle ILOM
- overviewOracle ILOM
Overview
- parallel boot policySpecify Parallel Boot of the SP and Host
- policy settingsConfiguring Policy Settings
- prompt
- Display the Oracle ILOM Prompt
- Log In to the System Console
- Oracle ILOM
Overview
- Oracle ILOM Remote System VNC ConsoleOracle ILOM Remote System VNC Console
- Oracle Solaris
- bootingBooting
and Shutting Down Oracle Solaris
- init commandShut Down the OS (init Command)
- overviewOracle Solaris OS
Overview
- shutdown commandShut Down the OS (shutdown Command)
- shutting down
- Shut Down the OS (shutdown Command)
- Shut Down the OS (init Command)
- Booting
and Shutting Down Oracle Solaris
- Oracle VM Server for SPARC
- overviewOracle VM
Server for SPARC Overview
- powering offPower Off a Server With Multiple
Active Domains (Oracle VM Server for SPARC)
- powering onPower On a Server With Multiple
Active Domains (Oracle VM Server for SPARC)
P
- parallel bootSpecify Parallel Boot of the SP and Host
- physical device namesImportance
of Matching a Physical Device to a Name
- policy settingsConfiguring Policy Settings
- POST, displaying versionDisplay the Firmware Versions
- powering off
- Power Off a Server With Multiple
Active Domains (Oracle VM Server for SPARC)
- Power Off the Server (Oracle
ILOM Web Interface)
- Power Off the Server (Oracle
ILOM CLI)
- Powering the
Server On and Off
- powering on
- Power On a Server With Multiple
Active Domains (Oracle VM Server for SPARC)
- Power On the Server (Oracle
ILOM Web Interface)
- Power On the Server (Oracle
ILOM CLI)
- Powering the
Server On and Off
- printenv commandprintenv Output
- probe-scsi-all command
- Correlate WWN Device Names With Physical
Locations (probe-scsi-all Command)
- probe-scsi-all Device
Naming (OpenBoot)
R
- RAIDHardware RAID Support
- resetting
- changing behaviorChange the Host Boot Mode Behavior at
Reset (Oracle ILOM)
- from OpenBoot promptOpenBoot Prompt
- overviewResetting the Server and SP
- SPReset the SP
- SP valuesReset the Values in the SP to Default Values
S
- server
- accessingAccessing the Server
- changing identifierChange Server Identifier Information
- controlling
- Booting and Shutting Down the OS
- Controlling the Server
- resetting
- from Oracle ILOMReset the Server (Oracle ILOM)
- from Oracle SolarisReset the Server (Oracle Solaris)
- shutting down Oracle Solaris
- init commandShut Down the OS (init Command)
- shutdown commandShut Down the OS (shutdown Command)
- sideband connection
- Configure SP In-band (Sideband) Access
- Oracle ILOM
In-band (Sideband) Management
- Connecting
to the SP (In-band)
- SP
- network accessDisable or Reenable Network
Access to the SP
- network address
- SP Network Address Options
- Configuring SP and Host Network Addresses
- reset valuesReset the Values in the SP to Default Values
- resetting
- Reset the SP
- Resetting the Server and SP
- system administration overviewUnderstanding System Administration Resources
- system communicationAccessing the Server
- system console, logging inLog In to the System Console
T
- TPMTrusted Platform Module Overview
- Trusted Platform ModuleTrusted Platform Module Overview
U
- updating firmware
- Update the Firmware
- Updating the Firmware
V
- virtual keyswitchSpecify Host Virtual Keyswitch Behavior
- VNCOracle ILOM Remote System VNC Console
W
- WWN device names
- probe-scsi-all commandCorrelate WWN Device Names With Physical
Locations (probe-scsi-all Command)
- syntaxWWN Syntax
Z
- ZFSHardware RAID Support