7320 Standalone to Mixed Disk Shelves
The following figures show a subset of the supported configurations for Oracle ZFS Storage 7320 standalone controllers with one HBA. To cable the controller to the disk shelves, see Getting Started with Cabling.
Using mixed disk shelves on a controller requires the following:
-
The controller must use only 4X4 port SAS-2 HBAs
-
Do not use mixed disk shelves in the same chain
Note - For port locations, see the hardware overview section for the corresponding controller in Oracle ZFS Storage Appliance Installation Guide. 4X4 port SAS-2 HBAs are only supported with release AK 2013.1.0 and later.
Figure 581 Standalone 7320 controller with one HBA connected to two mixed disk shelves in two chains (DE2-24 shown on the left)
Figure 582 Standalone 7320 controller with one HBA connected to multiple mixed disk shelves in two chains (DE2-24 shown on the left)
Figure 583 Multiple DE2-24 disk shelves in a single chain
Figure 584 Multiple Sun Disk Shelves in a single chain
