The following figures show a subset of the supported configurations for Oracle ZFS Storage 7420 standalone controllers with four HBAs. To cable the controller to the disk shelves, see Getting Started with Cabling.
Using mixed disk shelves on a controller requires the following:
The controller must use only 4X4 port SAS-2 HBAs
Do not use mixed disk shelves in the same chain
Figure 547 Standalone 7420 controllers with four HBAs connected to two mixed disk shelves in two chains (DE2-24 shown on the left)
Figure 548 Standalone 7420 controllers with four HBAs connected to three mixed disk shelves in three chains (DE2-24 shown on the left)
Figure 549 Standalone 7420 controllers with four HBAs connected to four mixed disk shelves in four chains (DE2-24 shown on the left)
Figure 550 Standalone 7420 controllers with four HBAs connected to five mixed disk shelves in five chains (DE2-24 shown on the left)
Figure 551 Standalone 7420 controllers with four HBAs connected to six mixed disk shelves in six chains (DE2-24 shown on the left)
Figure 552 Standalone 7420 controllers with four HBAs connected to seven mixed disk shelves in seven chains (DE2-24 shown on the top)
Figure 553 Standalone 7420 controllers with four HBAs connected to eight mixed disk shelves in eight chains (DE2-24 shown on the top)
Figure 554 Standalone 7420 controllers with four HBAs connected to multiple mixed disk shelves in eight chains (DE2-24 shown on the top)
Figure 555 Multiple DE2-24 disk shelves in a single chain
Figure 556 Multiple Sun Disk Shelves in a single chain