Any Oracle Private Cloud Appliance may contain more than one generation of server hardware. This depends on when the system was purchased and installed, and whether it has since been extended with additional compute nodes. At the time of the Oracle PCA Software Release 2.3, these server hardware generations may be part of your installation:
Table 7.2 Oracle Private Cloud Appliance Server Hardware Generations
Server Hardware | Default Memory Configuration |
---|---|
Sun Server X3-2 Sun Server X4-2 |
|
Oracle Server X5-2 |
|
Oracle Server X6-2 |
|
The default memory configuration can be extended for each of these server generations, but the options are different.
A Sun Server X3-2 or Sun Server X4-2 may be upgraded by replacing the default 16x 16GB DIMMs with 16x 32GB DDR3-1600 DIMMs. This increases the amount of RAM from 256GB to 512GB.
An Oracle Server X5-2 or Oracle Server X6-2 may be upgraded by adding DIMMs in the available slots. Two upgrade kits are available for these servers.
8x 32GB DDR4 DIMMs, increasing the amount of RAM from 256GB to 512GB while leaving 8 more free DIMM slots
16x 32GB DDR4 DIMMs, increasing the amount of RAM from 256GB to 768GB and filling all available DIMM slots
CautionBe sure to select the RAM modules with the correct speed rating that matches your server model.