7420 Clustered to Mixed Disk Shelves (3 HBAs)
The following figures show a subset of the supported configurations for Oracle ZFS Storage 7420 clustered controllers with three HBAs. To cable the controller to the disk shelves, see Getting Started with Cabling.
Using mixed disk shelves on a controller requires the following:
-
The controller must use only 4X4 port SAS-2 HBAs
-
Do not use mixed disk shelves in the same chain
Note - For port locations, see the hardware overview section for the corresponding controller in Oracle ZFS Storage Appliance Installation Guide. 4X4 port SAS-2 HBAs are only supported with release AK 2013.1.0 and later.
Figure 592 Clustered 7420 controllers with three HBAs connected to two mixed disk shelves in two chains (DE2-24 shown on the left)
Figure 593 Clustered 7420 controllers with three HBAs connected to three mixed disk shelves in three chains (DE2-24 shown on the left)
Figure 594 Clustered 7420 controllers with three HBAs connected to four mixed disk shelves in four chains (DE2-24 shown on the left)
Figure 595 Clustered 7420 controllers with three HBAs connected to five mixed disk shelves in five chains (DE2-24 shown on the left)
Figure 596 Clustered 7420 controllers with three HBAs connected to six mixed disk shelves in six chains (DE2-24 shown on the left)
Figure 597 Clustered 7420 controllers with three HBAs connected to multiple mixed disk shelves in six chains (DE2-24 shown on the left)
Figure 598 Multiple DE2-24 disk shelves in a single chain
Figure 599 Multiple Sun Disk Shelves in a single chain
