Go to main content

Oracle^® Exadata Storage Server X8-2 EF, HC, and XT Service Manual

Exit Print View

» ...Documentation Home » Oracle^® Exadata Storage Server ... » Preparing for Service » Preparing the Server for Component Replacement » Powering Down the Server

Updated: June 2021

Oracle^® Exadata Storage Server X8-2 EF, HC, and XT Service Manual

Document Information

Using This Documentation

About the Oracle Exadata Storage Server X8-2

Installation Procedure

Troubleshooting and Diagnostics

Preparing for Service

Safety Precautions

Electrostatic Discharge Safety

Key Identity Properties (KIP) Automated Update

Preparing the Server for Component Replacement

Powering Down the Server

Disconnect Cables From the Server

Extend the Server to the Maintenance Position

Remove the Server From the Rack

Take Antistatic Measures

Remove the Server Top Cover

Servicing Storage Drives

Servicing Fan Modules

Servicing Power Supplies

Servicing the Internal M.2 Flash SSDs

Servicing the Air Baffle

Servicing the DIMMs

Servicing PCIe Cards

Servicing the Battery

Servicing Processors

Servicing the Disk Backplane

Servicing the Front LED Indicator Module

Servicing the Temperature Sensor

Servicing the Internal HBA Card and HBA Super Capacitor

Servicing SAS Cables

Servicing the Motherboard Assembly

Returning the Server to Operation

Identifying the Server Ports

Setting Up BIOS Configuration Parameters

BIOS Setup Utility Menu Options

Monitoring Components and Identifying SNMP Messages

Language:

Powering Down the Server

Note - Some server components are hot-pluggable, such as storage drives, power supplies, fan modules, and M.2 flash SSDs. Components that are hot-pluggable do not require the server to be powered down when performing service procedures.

These sections describe how to power down the server:

Related Information

Power On the Server

Copyright © 2019, 2021, Oracle and/or its affiliates.